Trusted Fabricators.
NZ wide.
Sorted.

Learn more about the trades we cover.

Recent jobs posted

Check out how homeowners like you are using Fabricators on Builderscrack to build, repair and improve their homes right now.

Build a trailer

Posted 6 years ago

I need a basic trailer built, sub frame only, 3m x.1.2m

Read more

Make a flap on a gate

Posted 1 year ago

Looking to see whether it’s feasible to make a flap on this gate. As per the photo this is a red stag gate, I have marked off where I want to make a hinge flap so the gate can be pushed from either side to open the flap and allow our automatic mower to pass through the gate. Would be handy to have a latch that can lock in place so we can lock it from flapping if we wanted to.

Read more

Repowder coating

Posted 2 years ago

We have garden furniture that we’d like to get repowder coated. There are 4 swivel chairs and a round glass top table.

Read more

Trailer minor works for WOF. Quote

Posted 2 years ago

Purchased a ... mmH Box body trailer that needs some minor works, not a rebuild, just to get to wof standard. Ideally collect from Otumoetai address and work on at your site. Would want a quote for works required.

Read more

My castle

Posted 6 years ago

Supply and install steel framing on a tiny house project 7.2m x 2.4 m with lofts

Read more

Weld Container Moving Wheels

Posted 1 month ago

HI, Need a quote to fabricate 4 wheelsets to move container style cabins, Please see the pictures attached of what we need. These wheels will help the cabin be loaded on a tilt deck trailer with a winch. Need exact costing, thanks

Read more

Welding work

Posted 1 year ago

Needs some welding work done, cut and fix type work

Read more

Granny addition

Posted 4 years ago

Steel framing granny addition for about 90 metres square. With exterior Linea weatherboard and colour steel roof.

Read more

Weld brackets

Posted 1 day ago

I need two L brackets welded to the top of a shipping container in the Mount marina carpark asap. ......

Read more

Small welding job

Posted 9 months ago

Weld gate latch , jokey wheel and hinges to frame

Read more

Boutique Racking #2

Posted 5 months ago

We require 6 x racks approx 2.5 x 2m to be made from stainless steel square 25mm x 25mm. We would also like these to be delivered and installed.

Read more

Car hoist

Posted 2 years ago

Install new, 2 post car hoist on 150mm thick concrete pad.

Read more

Welding Handrail on outside stairs

Posted 3 months ago

My outside stairs handrail need welding for stability has they have broken off.

Read more

Mobile welding on Gav Farm gate

Posted 1 year ago

reweld Broken Gav farm gate joint

Read more

Pole removal and structural beam

Posted 5 months ago

External roof suppport pole removed and support beam modification.

Read more

Single galv metal chimney cap needed

Posted 11 months ago

I have taken out an old woodfire and am leaving the last part of the chimney sticking out through the roof. I need a simple cone-type cap/hat made to cover the end and make it waterproof. It will be permanent. Existing chimney is galv sheetmetal and about 24cm diameter. Something I can screw on with stainless steel small screws is fine. Hoping to get this done ASAP cos I've had no luck getting any roofers to provide a fix and we want to get the roof painted very soon.

Read more

Cafe table legs

Posted 1 year ago

3 small cafe tables need to have their legs dipped in black powder coat

Read more

Powder coating engine parts

Posted 5 years ago

I have the following engine parts i need powder coated: 2x cam covers 1x cam gear cover 1x coil pack cover 1x inlet plenum I need the inlet plenum done in a dark grey / gunmetal and the rest done in a silver to match my car. Can bring in the gas tank flap to match colours

Read more

Outdoor furniture powder coating

Posted 3 months ago

I have just bought outdoor furniture and would like the aluminium white instead gunmetal grey. What would this cost?

Read more

Find Fabricators in Tauranga

Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.

M

Mecon Ltd painting services

Joined October 2012

What I can do for you. Interior painting. Prepping / sanding / sealing / priming Exterior painting any residential, commercial, industrial and using the right products for each paint job ;-) Roof painting Industrial painting two pack Altex/International/Hempel Intumescent paint application / inspections Fire proofing ( this is a airless spray application this can't be applied by roller at...

Read more
B

Brian Horne Mobile Welding Services

Joined June 2015

Hello, Im a Mobile Welder Fabricator. For site Welding and Fabrication, off site fabrication as well. been a welder fabricator since 2003, and working for other company's and they would only send workers out to site one or two days per week. when most sites need welders on site till its finished.. or sites are at a stand still till steel work is finished..

Read more
D

Diverse Contracting Limited

Joined March 2011

Multi Skilled Builder/Project Manager. Solid team of sub contractors, electrician, plumber, roofer, plasterer and painter. Big or small. Experienced, committed reliable and trustworthy.

Read more
A

ACF Creatives

Joined November 2020

A hardworking young man who has been working since the age of 13. Started out gardening/landscaping but expanded this by doing general handyman work. After college spent 5 years as a property manager for one of the largest landowners in the UK, one of the skills I learned was Arboriculture, which I took on as a career change and worked at for 5 years ending here in NZ where I am now working toward...

Read more
H

HomeTech Solatube

Joined April 2011

HomeTech has been providing and installing home improvement products to New Zealanders since 1992 and has more than 70,000 customers across the country. From Kaitaia to Bluff, HomeTech’s nationwide network of credited installers and contractors install daylighting, condensation control, ventilation, heating/cooling, skylights / roof windows, hard wired fire alarms and attic stair solutions. Hom...

Read more
U

Undercover Industries Limited

Joined June 2020

Undercover Industries has been keeping New Zealanders Undercover since 2015. Located in sunny Mount Maunganui, we help New Zealanders enjoy the outdoors all year round, with our range of custom, locally engineered and handcrafted products. We are the home of custom Aluminum outdoor solutions. We design, manufacture and install Aluminium Pergolas, Awnings, Shadesails, Outdoor Blinds and Gates, as w...

Read more
S

Shade & Style

Joined March 2019

Shade & Style protecting your businesses and families. Not just shade sails! Whether you are looking for large areas of sun protection or just something to suit your entertainment areas - we offer a range of options and quotes are free! We believe in building long-term relationships with our customers by continuously manufacturing the highest-quality products and regularly exceeding our customers...

Read more
T

THE TILE LAYER

Joined August 2011

floor and wall tile layer, water proofing in all and any wet areas, over 20 years experience in residential and commercial tiling, stone, ceramic, mosaic, design and lay, i have done some building, plastering and painting, most general handyman stuff, welding most things like fences and trailers, look at my web sites please. ... ...... ...

Read more
H

Home & Lifestyle Improvements

Joined July 2019

Hi, we have been in the building industry for 21 years both new builds and renovations. We are very professional and punctual. We don't mind doing the small jobs when needed.

Read more
C

Classical Elements Limited

Joined December 2019

Hello we are a company that provides an array of services. We have a 3T Tipper truck and also trailers available with driver for cartage, section maintenance and repairs inside and out. Fencing/retainer walls. Welding and fabrication. Professional house cleaning, end of tenancy.

Read more
H

Hamish McKenzie Metal Polishing Services

Joined November 2017

Metal Polishing Services specialising in Stainless Steel. BA to Food grade finish, Marine, Commercial or Private jobs. Handrails, ballastrades, fittings, etc... no job to big or to small. Can travel to destination or complete work in shop, deadlines are a priority.

Read more
L

LeroysFabrication

Joined August 2020

General engineer, Welding fabrication mechanic alloy, steel, stainless welding trade qualified Marine repairs and maintenance Dairy service technician Water pump experience Fibreglassing experience

Read more
G

GTservices

Joined June 2020

I’m a jake of all trades, I have an extensive building back ground as well as welding/engineering. I’m a ailiable Monday to Friday . Any job is considered and free quotes will be given. Thank you for the opportunity Grant :)

Read more
N

Nick Pemberton Construction Limited

Joined April 2020

Nick Pemberton has 15 years experience in the construction industry, a third generation of construction contractor. Nick started the company in 2011 and has grown steadily from there. Specialising in kerbing and large civil retaining walls however over the years the company has branched out into private residential & council projects with everything from green waste removal to housing foundations....

Read more
W

Waikato Construction Management Ltd

Joined May 2020

Waikato Construction Management is an established construction company that is based in Te Awamutu and services the greater Waikato Region. The company is involved in the commercial, residential and maintenance sectors of construction and is managed with a hands on approach by three directors: John Morrow (Business Development/Operations) - Gary White (Contract Administration) and Trina White (A...

Read more
H

Hurley Engineering LTD

Joined August 2019

Hurley engineering is a small company that specialise is fabrication- anything from stainless steel hand rails to aluminium automatic gates, Gettting the job done on time, within budget and taking pride in our work

Read more
B

Baywood Construction

Joined May 2019

We are a Tauranga owned and operated business specialising in premium decks, home renovations and new builds. With over 15 years building experience, we are passionate about building and are driven by values of hard work and perfection. We pride ourselves on providing our customers with a finished product that we both can be immensely proud of.

Read more
D

Detail Connect Ltd

Joined July 2012

Architectural Drafting, Structural Drafting, Structural steel and precast detailing/manufacturing drawings and drafting service using 3D modelling software. ... Project specific samples a available on request.

Read more
H

Handy Marz

Joined July 2018

Hi, I am a German brought up in NZ with very fine attention to detail & quality. I pride myself on making every job great & giving you what you want. My scope of work is very wide & my background is in light engineering, landscaping & maintenance as well as full home renovations.

Read more
F

Forgefx

Joined August 2019

Hi, we make and repair all things steel. We use a Hundred Year Old Coal Forge along with modern MIG Fabrication to enable us to make almost anything from steel including Traditional Wrought Iron Balustrades Gates and Handrails to Steel Beams for Houses. We have a Modern Well Equipped Workshop on Rural Land just outside of the City. We would be pleased to meet with you to discuss your upcoming pr...

Read more
Get started now! Post your job for free and find the right tradie. Post your job for free, now!