Trusted Fabricators.
NZ wide.
Sorted.

Learn more about the trades we cover.

Recent jobs posted

Check out how homeowners like you are using Fabricators on Builderscrack to build, repair and improve their homes right now.

Pottery kiln wheel needs to be re-welded on to base.

Posted 1 year ago

Hi there, I had an old kiln delivered to me and in the process one of the base trolley wheels got knocked off... it needs re-welding back on to the leg at the base... the trolley wheel has a small square plate which would normally be attached to the steel L shaped bracket leg (see photos). Also the front door of the kiln could do with a round circular disc attached where the peep hole is just to tidy it up a bit. See photos attached. The Firebrick protects it from the heat, but the door peep hol...

Read more

Vehicle modification

Posted 4 months ago

I require a variation of my canopy build to exhaust heat from the drivers side canopy so I am not required to open the door while my generator is running. Requirements cut panel for vent placement colour code vent installation to clean finish

Read more

Refurbishing Metal Chairs

Posted 1 year ago

I have 4 metal outdoor dining chairs that need a bit of rust removed and I'd also like to have them powder coated white again please.

Read more

New Mailbox seeks long term attachment to existing pole

Posted 1 year ago

I need a new mailbox mounted to my existing mailbox pole. The old one rusted off so the support strip underneath isnt there any more.

Read more

Plate steel patch welding. Supply and weld

Posted 2 months ago

Patch weld to steel boat hull about ten patches

Read more

2 Chimney Caps & 2 Ash Pans.

Posted 1 year ago

We require two chimney caps and two ash pans made for our two outdoor fireplaces.

Read more

4 Simple steel troughs needed

Posted 5 months ago

Hi there :) I need 4 troughs made up 2020 long x 150 x 140 (see picture). It's for a DIY living wall feature I am making for my tiny house, so the troughs will have water in them to 20mm deep and then pots with plants. The steel they are built out of needs to be fine with long term water storage. The weight it will hold is about 30 kgs per trough so the steel needs to be reasonable strong (Open to suggestions on how thick). I can paint them myself or leave them natural. Thank you!

Read more

New Mailbox seeks long term attachment to existing pole 2

Posted 1 year ago

I need a new mailbox mounted to my existing mailbox pole. The old one rusted off so the support strip underneath isnt there any more.

Read more

Dining Chair repair

Posted 7 months ago

Hi, I have a couple of metal frame dining chairs that have snapped. Need welding. Thanks

Read more

Broken fridge pipe repair - brazing

Posted 1 year ago

Broken fridge pipe needs brazing back together. Pipe is very easy to access.

Read more

Hamish Arora

Posted 10 months ago

need to strengthen underneth steps

Read more

Fireplace and outdoor heater metal cover

Posted 3 months ago

Outdoor fireplace requires metal/steel cover to surround chimney area. Also need about 1m long metal cover / miniroof to attach to outside house wall above infrared heater to protect heater. Photo shows style of heater in a different location. Another photo shows house wall with wire to attach to new heater where cover is required. Remaining photos are of fireplace.

Read more

Stainless Steel Pipe Handrail

Posted 7 months ago

2m worth of stainless steel handrail to be supplied and installed

Read more

Metal Table Legs

Posted 1 year ago

My dad is sourcing a Macrocarpa slab that we are making into a dining table but we need some steel table legs made up for it. We are hoping to get a trestle style leg like what is shown in the first picture but without the cross beam in the middle. To compensate for the lack of a cross beam I was thinking of having a larger flat plate on the top. Our friends have a very similar table leg on a commercially bought table but that is made from solid steel rather than tubing and is much thinner...

Read more

Graham Little

Posted 7 months ago

Welding steel frames (70 x 50 angle) around window openings in containers. All materials and equipment on hand. We have both MIG and Arc welders.

Read more

Weilder needed for small call out job

Posted 1 year ago

Weilder needed to spot weild 4 cleats on to existing steel post for support beam

Read more

Gym bench welding

Posted 1 month ago

The bottom part of my gym bench is going to snap due to using heavy weights. Need someone to come and weld the steel. I have uploaded some photos.

Read more

Fireplace Chimney Caps

Posted 1 year ago

I require two stainless steel chimney caps to be made to fit my two outdoor fireplaces, and installed.

Read more

Tank restraints

Posted 1 year ago

Hi there we need to have seismic metal supports added to our treatment tanks to hold them in place. This will require both fabrication and in situ installation. Please see images of similar supports we have had put on other tanks

Read more

Unscrew a screw that has been mis-screwed

Posted 1 year ago

A screw has been screwed incorrectly in a non-straight way and cannot be unscrewed. It is one of the screws on the door lock. You can also check this video from Google drive to see how it looks like now. ...... az

Read more

Recent fabrication reviews

With over 157,000 reviews in total, and an average rating of 9/10, you can be confident that your job will be handled with the utmost care.

Hamish Arora


30th July 2019

Workmanship
 5
Cost
 4
Schedule
 5
Communication
 5

New Mailbox seeks long term attachment to existing pole 2


20th August 2018

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

2 Chimney Caps & 2 Ash Pans.

Work carried out by the owner/operator

24th July 2018

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Hamish Arora


30th July 2019

Workmanship
 5
Cost
 4
Schedule
 5
Communication
 5

New Mailbox seeks long term attachment to existing pole 2


20th August 2018

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

2 Chimney Caps & 2 Ash Pans.

Work carried out by the owner/operator

24th July 2018

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Find Fabricators in Waitakere

Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.

G

George Mallory Builders Limited

Joined February 2007

Hi - We've been building new houses and renovating old ones for the last 15 years. We've been in Christchurch for the last 10 years and have worked on jobs around the city as well as in regional parts of Canterbury. While we specialise in major renovations and new builds we also do smaller jobs from time to time - check out the photos below. We are very professional and work hard to meet deadlines...

Read more
C

Chandras welding & fabrication

Joined March 2016

Hi I've have being doing welding and fabrication jobs for the past 22 years . I specialise in all sorts of metal fence and gates. I work with steel ,louvres , Aluminium and all sorts of metal fabrications. I do automation for the gates include keypad, gate openers, video intercom, push button etc .I work with all the brands for gate openers such as Panasonic, LOCK MASTER,,CENTURION ,BFT, BENINCA...

Read more
S

Sethi welders ltd

Joined August 2017

Sethi Welders Ltd is a Welding, Fabricating & Renovating business based in Auckland, We have our own workshop which gives us an added advantage to customize our products as per customer's requirements. We are Certified Welders and have experience of more than 10 Years. We provide complete Steel Welding Services & Fabrication services in and near by Auckland. We handle all sectors i.e. Res...

Read more
T

Teraforma Construction

Joined November 2010

I am a builder who does tiling and landscaping when required, I have 15 years experience working in Auckland, Northshore, Hibiscus Coast & New Plymouth.I hold a degree in physical geography and I am very good with structural work. My rates are very reasonable and I work hard to meet deadlines for project completion.

Read more
C

Core Civil Solutions nz Limited

Joined December 2019

Hi, we have been involved in the rebuild of Christchurch for over 7 years. We have experienced LBP builders and able to do a wide range of building works and construction. We are specialist in foundation re-level works and retaining walls, Our team are able to provide a solution that works for you. Please look at our web site for more information. https://www.corecivil.co.nz/

Read more
B

Barge Engineering LTD

Joined August 2019

Hi there we are a family engineering business that works from a factory in East Tamaki we service the whole of Auckland and no job is to small. We value our customer and strongly belive in giving the customer the best price and best quality product! Our specialty is gates and fencing, truck modifying or scratch builds and structural steel but we also can do stainless and aluminum jobs.

Read more
H

Heisen Construction Limited

Joined February 2013

Installers who are experts in all types of fencing, commercial security, wrought iron, swimming pool, tennis court fencing and lighting, timber fencing, residential pipe and mesh fencing all types of gates and automation. Michael Heisen Construction

Read more
C

CGS NZ

Joined December 2014

Thank you for your project description / details initiated, The job. We have been selected to assist you with a quotation with regards to your requirements. Kindly select our details and we will endeavour to assist you asap, schedule a site visit, confirm your expectations/requirements and prepare a quote accordingly. SUMMARY Frameless Glass, Shower & Mirrors, Pool Fencing & Balustrades....

Read more
J

JJ Welding Services

Joined December 2019

Hi, I am an experienced welder/ rigger for almost 6 years. I am very professional in conducting myself especially dealing with people. I am a hard worker and always complete project on time. My price is very affordable.

Read more
K

Kitset Assembly Services

Joined July 2018

Hi. I am a man in a van Trades person specialising in assembling any thing in a kitset including garden sheds, furniture, trampolines,etc. My van is fitted out with everything I need to carry out handyman jobs around your home. I can give you a no obligation quote promptly and am happy to fit in with your schedule.

Read more
N

North plaster

Joined December 2019

Hi, I've done drywall installing, plastering and painting for a quit while from time to time. I'm specialized in renovation and also smaller job. I do providing competitive quotes and then completing jobs on time.

Read more
2

2 Construct Ltd

Joined June 2018

We have been servicing various building industries for over 25 years, from film sets, theatre sets and shop fitting construction, to bespoke furniture, house renovations, painting and deck building. Basically, we cover most types construction, but whatever job we are on, our core principals of honesty, high standards and a strong work ethic applies. No job is too small!

Read more
I

Integrity Decorating

Joined January 2010

Trade Qualified Painter and Paperhanger, 30 years experience on all aspects of painting and paperhanging. Have spray gear- airless, pressure pot, hvlp, xvlp . waterblasting equipment. Have special sander/vacuum for plastering jobs Some scaffollding, Trestles, planks and mobile platforms Can do Residential or Commercial. Willing to travel and would be interested in travelling around nz to o...

Read more
F

Fix and Repair Services

Joined April 2018

I have been doing general handyman work for the last 25 Years. I am very honest, reliable, hard working and trustworthy I believe in doing the job efficiently and correctly to very high standards.

Read more
M

Metfab limited

Joined August 2018

Hi, we are a small company that takes pride in high quality work on residential and commercial projects. With staff that has over 10 years of experience in some of Aucklands biggest stainless steel/ sheetmetal companies, no job is to big or small.

Read more
O

On Time Maintenance Ltd

Joined April 2019

Handyman , Repair and maintenance in general anything wood or steel works . House , gates fence ,decks , soft chemical wash and high pressure cleaning house , drive ways etc

Read more
D

D&D ENGINEERING WORKS LTD

Joined January 2020

WE DO ALL SORTS OF WELDING , FABRICATION , RIGGING , STICK WELDING , TIG WELDING , MIG WELDING GAS LESS WELDING ALSO DUPLEX ,STAINLESS /CARBON ,ALUMINIUM STRUCTURAL STEEL, SHUTDOWNS, SITE WORKS, SHIP REPAIRS , STEEL GATES &FENCES GENERAL ENGINEERING

Read more
R

Royal Building Service Ltd

Joined July 2018

Our qualified glass tradies can do any big or small works in great Auckland area and neighbor cities. Onsite measurement, install, repair 24 hours and 7 days. Free site assessments, Prompt and reliable service, top quality workmanship, affordable cost, we endeavor to have each customer to get the great value for money. The business is home based operated, no high overheads. • All of our produc...

Read more
M

mats engineering

Joined January 2014

Hi I'm Mat. I have been in the industry for over 15 years now. I'm a fully qualified engineer. No job to big or to small. I pride myself on providing competitive quotes and rates, then completing job on time and on budget. Welding, pool fences, handrails, stainless, aluminum, I do it all.

Read more
C

Centurion Roofing

Joined November 2014

With more than 19 years experience in roofing, from roof repair , Roof painting or complete Roof replacement and EVERTHING in between. We offer a free Quote. We are very affordable, professional and honest. I'm a qualified Quantity Surveyor and have worked in the roofing trade as a tradesman and estimator for a number of years. I take pride in my work and value customer service and good relatio...

Read more
Get started now! Post your job for free and find the right tradie. Post your job for free, now!