Trusted Fabricators.
NZ wide.
Sorted.

Learn more about the trades we cover.

Recent jobs posted

Check out how homeowners like you are using Fabricators on Builderscrack to build, repair and improve their homes right now.

Astute Offices 2

Posted 3 years ago

I need to remove a door from steel studs fill the gap with gib, then cut out a whole for the same door in another part of the partition wall and put finishing around it

Read more

Hi hatt repair

Posted 1 year ago

Small metal plate needs to be made

Read more

Secure weatherproof drop box required to be made

Posted 3 years ago

We need a steel weatherproof secure drop box made to secure onto our fence or somewhere in our yard for when our staff need to pick up/drop things off like PPE gear documents etc after hours which we will fit with a combination lock. We need someone GST registered who can issue us with an invoice for payment. For more information please email me. We will require a quote first :)

Read more

Emergency welding job for kids bike xmas present

Posted 3 years ago

Emergency welding job required before xmas day!!! A kids chopper bike we bought second hand as a christmas present is needing the seat re-welding. Took it into a shop in Cuba St who went and welded it the wrong way then said it was too late to fix and he's closed until Jan 8. Idiot! Photo is of seat before being welded the wrong way.

Read more

Brickshithouse

Posted 3 years ago

I require prefabricated flatpack steel framing made for assembly by myself on a difficult access site. Will have to be made to meet window door plumbing and electrical requirements.

Read more

Custom Aluminium Sliding Door and Frame

Posted 2 years ago

Custom large aluminium sliding door and frame, shop drawings provided. Aluminium welding required.

Read more

Corrosion/rust on steel balcony frame

Posted 1 year ago

I need someone to advise how to treat rusted balcony frame, and check to see if it is cosmetic repair needed, or structural. Balcony has rusted flashings and also some parts of the steel frame as well. Looks to be cosmetic in many areas but need a professional opinion.

Read more

Steel frames to be powdercoated black

Posted 4 days ago

Hi my fabrication shop have 16 x steel caster table frames to have powdercoated black. They are 2000mmx900mmx1000mm Made of 50mmx50mmx3mm steel SHS (mill finish) with a bits of angle iron welded in the bottom section of frame to support a recessed shelf and caster plates in bottom corners to mount casters too. I have attached a rough sketch, but bear in mind the frames will likely have 2 extra vertical posts in the middle and one extra horozontal bar in the middle of table top....

Read more

Weld section of caravan chassis

Posted 2 weeks ago

Caravan nearly failed it's warrant due to crack in metal framing underneath caravan body. Access is relatively easy underneath. Needs a small bracket/bar welded on. Can get photos tonight...

Read more

Aluminum Welding

Posted 5 months ago

I have an unfinished aluminum top for my boat. It's an unfinished project from the guy I bought it off. Some of it is just tacked together some finished. Looking for someone to finish it. Also interested in having a sheet aluminum cover made for it but just a price to finish the welding would be a good start. Let me know if you need more pics.

Read more

Help to construct a piece of lawn care equipment

Posted 1 year ago

Would like help to construct the metal work of a walk behind shielded lawn sprayer. Strong, light and tidily made. Pics show similar products overseas. Would like to incorporate the shield for the tank sprayer onto the walking boom. Not very complicated but would like it to be well made(unlike what I would do)

Read more

Powder coating door extras - small job

Posted 6 years ago

We are looking for someone to do a small powdercoating job. A door knocker, keyhole surround, handle and 2 decorative metal pieces approx 40cm x 5cm

Read more

Aluminum Welding #2

Posted 5 months ago

I have an unfinished aluminum top for my boat. It's an unfinished project from the guy I bought it off. Some of it is just tacked together some finished. Looking for someone to finish it. Also interested in having a sheet aluminum cover made for it but just a price to finish the welding would be a good start. Let me know if you need more pics.

Read more

Luke Williams

Posted 1 year ago

Part of my property with steel foundations is in need of rust repairs/ new sections fabricated. The property is on a slope with poles but I have scaffolding going up on Thursday (22/3) for a separate job which will make it easy to assess. So am keen to get this sorted ASAP all at the same time.

Read more

Steel table legs

Posted 3 years ago

Hi, I'm looking to get two table legs made from flat steel (80 x 12 mm). Size of frame is 700 x 700 mm (H x W). Finished with black metal primer and countersunk mounting holes. Please see picture for reference.

Read more

Astute Offices

Posted 3 years ago

I need to remove a door from steel studs fill the gap with gib, then cut out a whole for the same door in another part of the partition wall and put finishing around it

Read more

Aluminum welding job

Posted 2 years ago

I have alumnium frame bike which has devloped a crack on bottom tube. it was hit 2 years back on that spot by opening car door. I wanted to get that crack welded.

Read more

Alloy Plate Weld on Boat

Posted 2 years ago

Roughy needing a 100x100mm plate welded onto our 5m alloy boat, there is a small hole with some corrosion on the hull. Assuming the corroded area will need to be cut out. Any help would be greatly appreciated, thank you in advance!

Read more

Square Tube - mitre cuts

Posted 2 years ago

I want 25mm square steel tube cut into the following lengths: 16 @ 2020mm (mitre cuts) 16 @ 1020mm (mitre cuts) 16 @ 300mm (square cuts) I have the steel, already cut into 2.1m lengths but want accurate mitre cuts done using a band saw or cold saw. My abrasive cut-off saw blade flexes and requires additional grinding to get a decent fit.

Read more

Find Fabricators in Hutt Valley

Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.

M

Mandy Wood Stained Glass

Joined January 2011

I have been making stained glass for 25 years and was the first stained glass artist in Queensland to be accredited by the governent to train apprentices who I used in my 5 galleries. Over the years I have made 1000's of stained glass commission windows and doors for the cyclone prone Queensland coast line. I came back to NZ and bought a home and gallery in Dargaville in 2007. I can ship s...

Read more
B

Buildvista Ltd

Joined June 2010

Qualified. Licensed building practitioner. On time and on budget. Quality workmanship guaranteed. References available. _________Services__________ -Small design and build projects -Building consents. -New homes -House and Kitchen/Bathroom Renovations -Decks, Fences and Carports. -Re-cladding and maintenance work. BuildVista Ltd

Read more
G

Goodall MetalWorks Ltd

Joined January 2021

Hey there, I am a qualified Engineer for all your engineering needs, I am also mobile so can come to you. Some of the things I do include but are not limited to . •On-site Welding •Repairs •Maintanance •Fabrication •Gates

Read more
E

Eco Doors and Windows

Joined May 2012

PVC Joinery, doors and windows into new houses, and replacement of Aluminium and timber joinery. Little maintenance, the most thermally efficinet product on the market. Mitten Cladding. Vinyl cladding onto new or old houses. Recladd with a Canadian product 50 years experience in Canaadian conditions. Full install service on both

Read more
H

HomeTech Solatube

Joined April 2011

HomeTech has been providing and installing home improvement products to New Zealanders since 1992 and has more than 70,000 customers across the country. From Kaitaia to Bluff, HomeTech’s nationwide network of credited installers and contractors install daylighting, condensation control, ventilation, heating/cooling, skylights / roof windows, hard wired fire alarms and attic stair solutions. Hom...

Read more
C

Custom Balustrades

Joined August 2007

I manufacture handrails balustrades and gates usually aluminium stainless or steel with railings wire or glass, I am a qualified tradesman and ticketed welder so can do other engineering work ie beams.check the website link to metalwork

Read more
C

Carpentry & Civil Ltd

Joined May 2019

Hi, my name is James Palmer and I'm the managing director of Carpentry and Civil Ltd. I've been in business since 2012 and have a reputation for quality workmanship. I pride myself on doing a quality job for a fair price. I believe I have excellent communication and will work with you to get your job done safely and efficiently. I have vast knowledge in experience across multiple trades and want...

Read more
M

Makers Fabrication

Joined September 2014

We are a bespoke prefabrication and construction company which specialise in architecturally designed houses. We have a depth of experience in the team which is made up of Project Managers, Engineers, Qualified Carpenters and 3D designers. Our aim is to provide accurate, efficient construction at a very competitive price and that all builds are project managed to ensure that they run smoothly.

Read more
S

Shed 14 Boatbuilding

Joined November 2020

Hello there, I am a qualified wooden boat builder and experienced cabinet maker/ carpenter who has over 25 years experience in woodworking and renovations. I have over the years renovated houses and restored villa's, repairing wooden windows/doors and cabinetry and building custom wooden fixtures . I can build new windows and doors or repair you old ones, fix your deck or verandah, repair wea...

Read more
R

R Holmes

Joined June 2017

We do Home Maintenance work around the home . Lawns ,Fences, Gardens, water blasting and any welding work etc.. .Any house repairs, plastering, painting and small house renovations anything considered.

Read more
S

Silverlining Contracting Ltd

Joined July 2012

Hi, We have been laying and doing drainage work in and around the Wellington region for 35 years and we are familiar with all aspects of drainage and water installation . We are hard workers and this shows in our meeting deadlines to the satisfaction of the customers.Also lately we have been cleaning up sections. No job is too small.

Read more
O

over proof roofing

Joined August 2017

Hi, we are a husband and wife team. With over 25 years experience in renovating homes. Big or small nothing is a problem, just ask and we can give you a solution or options regardless of budget. We are skilled in all aspects of renovation, including re-roofing, welding and steel work, painting, curtaining, landscaping, furniture restoration, quick home do ups so your home is ready for tenants or t...

Read more
W

Wilkie Building Company

Joined February 2010

Hello We are a trade certified father/son team with a total of over 62 years building experience between us. We are licensed building contractors with the New Zealand goverment and department of building and housing. We also hold current site safe and ramset licences. We have extensive experience in new residential dwellings, extensive and basic additions and alterations, commercial buildin...

Read more
L

LeroysFabrication

Joined August 2020

General engineer, Welding fabrication mechanic alloy, steel, stainless welding trade qualified Marine repairs and maintenance Dairy service technician Water pump experience Fibreglassing experience

Read more
W

Whisk Renovators

Joined February 2009

Whisk Renovators is a renovations company, providing innovative solutions to Kitchen and bathroom consenting, design and build projects. Whisk services the greater Wellington region in both the residential and commercial sectors. Whisk has been a member of New Zealand Master Painters since 2009, providing quality service and workmanship guarantees to our Clients. We won National awards in ......

Read more
T

The Outside Guys

Joined November 2016

Any exterior maintenance/building job small or large. Beat any reasonable quote. 10 yrs arborist experience. 15 years scaffold/construction industry, Roof restoration specialists. On time, efficient professional service with a smile. We specialize in full exterior makeovers but are happy to do all or part of any task required. Can't wait to hear from you.

Read more
O

On Point Engineering Ltd

Joined October 2020

On Point Engineering Ltd is a small 100% Wellington family owned business that offer a range of services for your home or business. From design and installation of custom made ducted heat pumps and energy recovery ventilation systems, installing split systems to servicing existing heat pumps. Also do a large range of electrical and mechanical work. Registered Electrician. Registered Refrigera...

Read more
L

Lenex Engineering

Joined March 2018

I have been in the engineering trade for 30 years and now opened up a metal gates and fences business.we specialise in light engineering. We also are a team of respected painters.

Read more
Z

Zepo Property Maintenance

Joined December 2011

Zepo property maintenanceprovides a personalised service for home, rental and commercial property maintenance. *General property maintenance *Paint Stipping & Repainting Houses *Roof Repairs & Painting *Small Building work *Tiling/Certified in Wet area Waterproofing *Plastering Gibing & Painting *Concrete placement and repairs *Landscaping and ground work *Complete renovation for Sale &...

Read more
P

Paint People

Joined January 2018

Hi, we are new to BuildersCrack, but we are a group of experienced Painters, Designers and Tradespeople who work in the film industry. We do this inbetween projects, and specialise in small-scale jobs, but also do larger contracts from time to time. We are very professional, hard-working people who pride ourselves on providing high-quality work, based on accurate quotes and timeframes.

Read more
Get started now! Post your job for free and find the right tradie. Post your job for free, now!