Trusted Fabricators.
NZ wide.
Sorted.
Learn more about the trades we cover.
Recent jobs posted
Check out how homeowners like you are using Fabricators on Builderscrack to build, repair and improve their homes right now.
Bens clothesline
Posted 2 years agoOur rotating clothes line has a break in it, almost 360 degrees around, just below where the internal spinning pole sits. At present it has two U shaped bolt brackets bracing it together, but I’d like someone to come and weld it back together so we can remove the bolts and it can go back to rotating. See the images below.
Read moreSign bolting
Posted 2 years agoWe need two signs - 1x 1m in width and 1x 2.5m in width to be bolted to a steel shipping container at a Farm Source Store
Read moreWeld Rotary Clothes line arm back on
Posted 2 months agoWanting to see if a rotary clothes line arm can be welded back on as it has come off at our tenants house. Probably be easier to do onsite.
Read moreNeed to modify 2 shipping containers 40 ft each
Posted 1 year agoAt present I have plans to buy 2 x 40 ft iso shipping containers. I have purchased 2 sets of architectural drawings 1 set to support and sit these 2 x 40 ft containers 1 level higher on two concrete walls. In between these 2 concrete walls will give me 2 small apartments with open plan living. The real jobs come from the 2 x40 containers being lifted up to give me another 2 apartments. Here big glass windows and steel staircases will be built. I plan to build a loft in 1 or 2 apartment...
Read moreRemoval of a rotary clothesline
Posted 2 years agoWe have a rotary clothesline that need to be removed. Unfortunately time is of essence now as we have a wedding here in a couple of weeks. I have had a couple of people who say they will do it and do not turn up. We need someone with a metal grinder who can cut through the clothesline pole at ground level, possibly either take it away or cut it into pieces that will fit in my car so I can take it away. We need someone who is reliable and will turn up to do the job. many thanks.
Read moreCustom shower tray
Posted 8 months agoFabricate a custom "tile over" shower tray 680mm x 720mm x 120mm deep, in galv sheet metal, center drain hole (will spec the size as this is for a motorhome not a regular house).
Read moreSmall welding job
Posted 2 years agoOur front gate post (metal) needs rewelding. Probably a 5 minute job. Quick quote please.
Read moreFind Fabricators in Palmerston North
Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.
Kiwipure Ltd
Joined May 2013We design and sell water treatment systems for households, rural applications and up to medium sized commercial businesses. Our district is the whole of New Zealand as we can arrange plumbers to install anywhere in New Zealand
Read moreCheap Titles
Joined December 2010Hi, I am a resource management planner with 6 years planning experience working at councils and for private planning consultancies. The sort of work I can do for you is: providing you with certificates of title or interests registered on titles, preparing resource consent applications and assessment of environmental effects, assisting with any monitoring or enforcement issues, subdivision quer...
Read morePainter & Decorator
Joined July 2009I have 30 years experience in tthe painting and decorating trade. Very meticulous in everything I do. References supplied if required. Good rates.
Read moreC R WALLACE LTD
Joined November 2010I am a craftsman plumber\drainlayer and ECCA registered solor hot water installer with a 33yer trade history in building renovations;alterations and new housing including life style;farm and apartment experance. I am therefore proud to offer a confident and personal approch to all my clients whatever there requirments may be
Read moreGround Source Limited
Joined May 2009We provide high efficiency ground source heating and cooling solutions New Zealand wide through our installer/dealers. We are the NZ agents for WaterFurnace products. Ground Source systems are extremely well suited to commercial applications such as hotels, motels, schools, offices and factories, as well as domestic homes. We can provide a high efficiency eco-friendly ground source solution to...
Read moreDarren McQuilkin Services
Joined June 2017Engineering & Property Outdoor Maintenance / Makeovers. I have 32 years sound experience within the engineering / construction and consultancy sectors. Now back and based in the Manawatu offering a broad range of services including but not limited to. Mechanical Maintenance, Fabrication,Welding & Repairs. Yard / Section general tidy-up's, tree & shrub trimming, green & solids waste remova...
Read moreMandy Wood Stained Glass
Joined January 2011I have been making stained glass for 25 years and was the first stained glass artist in Queensland to be accredited by the governent to train apprentices who I used in my 5 galleries. Over the years I have made 1000's of stained glass commission windows and doors for the cyclone prone Queensland coast line. I came back to NZ and bought a home and gallery in Dargaville in 2007. I can ship s...
Read moreTRS Carpentry
Joined July 2009I'm a NZ trained and qualified carpenter/builder, and have worked on new houses and extensive Renovations/Alterations, both in New Zealand and in the UK where I currently live.
Read moreColourScheme
Joined September 2011ColourScheme can provide all the services you need to turn your house into a home. We specialise in interior paintwork, but also consider small exterior paint jobs, minor gib repairs and general maintenance work. Our aim is to provide an affordable, yet high quality service with expert advice and brilliant craftmanship. We always clean up beautifully afterwards and we offer a full refund on lab...
Read moreKIWISOL solutions for kiwis
Joined September 2017Having spent a number of years in the Building & Engineering fields I am now semi retired but still have a fully equipped workshop for both engineering and building work and specialize in light fix it and problem solving. Love coming up with that special little one off gadget to solve you needs.
Read moreIgl Hospitality Ltd
Joined September 2010Igl Hospitality Ltd Specialize in Commercial Kitchen Equipment and Industrial Ventilation Igl Hospitality Specialize in industrial ventilation systems including make-up air, extract air, dust & fume Control etc. 100% New Zealand Made Stainless Steel Kitchen Equipment. We are a registered business supplying high quality commercial kitchen equipment at highly competitive Prices and New Zealand...
Read moreHomeTech Solatube
Joined April 2011HomeTech has been providing and installing home improvement products to New Zealanders since 1992 and has more than 70,000 customers across the country. From Kaitaia to Bluff, HomeTech’s nationwide network of credited installers and contractors install daylighting, condensation control, ventilation, heating/cooling, skylights / roof windows, hard wired fire alarms and attic stair solutions. Hom...
Read moreClassical Elements Limited
Joined December 2019Hello we are a company that provides an array of services. We have a 3T Tipper truck and also trailers available with driver for cartage, section maintenance and repairs inside and out. Fencing/retainer walls. Welding and fabrication. Professional house cleaning, end of tenancy.
Read moredunn building
Joined July 2013Have been a qualified building since 2015, have been working over in England for the past 2.5 years and now back working for UCOL teaching carpentry and looking for the odd job to do after work/weekends.
Read moreUp Ease LTD
Joined March 2011Here at Up Ease we have over 15 years experience providing access solutions for residential and commercial properties. Specialising in all forms of vertical access we also provide Dumb waiter's chairlifts for stairs, frieght lifts, hospital bed lifts,passenger lifts,Maintenance/service and car park solutions. As well as elevators we can undertake onsite engineering, demolition and removal wor...
Read more