Trusted Fabricators.
NZ wide.
Sorted.

Learn more about the trades we cover.

Recent jobs posted

Check out how homeowners like you are using Fabricators on Builderscrack to build, repair and improve their homes right now.

Container ramp

Posted 4 months ago

Little container ramp required to prevent lifting of carts into container

Read more

Welder

Posted 1 month ago

building steel portal frames and welding them to 2/ 40ft containers

Read more

Metal folder

Posted 3 months ago

Need a folder built to be able to fold a 20mm edge at 45 degree 700 long of 2.5mm stainless. I currently have a normal finger folder that can fold mild steel 1200 long 1.5mm thick but not strong enough to fold 2.5mm ... n either build a new one or modify the 1 I have.price will depend on the engineer as to modify or build new I'm open to all options and ideas.disregard the price that is set

Read more

Fix metal latch with bolt and stay.

Posted 4 months ago

The latch has been damaged by forceful slamming shut. The hole the screw sits in has become enlarged, resulting in the latch being unable to secure the gate. The stay the latch sits in on the brick column is also a little loose. Urgent quote needed - must be able to quote today (Sunday 14) or Monday 15 ( after 5pm).

Read more

Aluminium pipe bending

Posted 2 weeks ago

I have 24x tubes that need 2x bends in each. 25x1.5mm round Aluminium tube. Simple job if you have the right gear. Needs to have a 100mm radius and OK if the tube is squashed a little.

Read more

Galvanised pole welding

Posted 5 months ago

Need to extend galvanised pole by welding.

Read more

Range hood cover

Posted 4 months ago

I have a lean-to roof in my kitchen which means the included cowl does not fit my range hood. I was hoping to get a quote for either fabricating or adjusting the current cover

Read more

Repair Steel Studs

Posted 2 weeks ago

Steel stud was drilled into to hang a item on the wall & needs to be filled or repaired as work not done as prescribed on Steel framing web site.

Read more

Wheel needs welding on lawn mower

Posted 1 month ago

Hi My wheel on lawn mower needs welding back on as it has broken off.

Read more

Book Case repair work

Posted 3 months ago

Metal book cases need new wheels handles and general metal repairs

Read more

Trim range hood cover

Posted 2 months ago

I have a lean-to roof so the cover of my range hood needs to be cut to fit. Photo attached.

Read more

Milled steel plates

Posted 3 months ago

I need 56 steel plates milled flat with 28 of them to have a milled recess with a hole drilled and tapped for a grease nipple.

Read more

Boat trailer

Posted 2 weeks ago

Trailer has been sandblasted and primed in preparation main rust damage is only on one of the straight sections to the back (2200mm long) what i thought we could do in is effectively wrap it with 2 pieces of steel angle. there are a few small holes that will plate over, and need to fabricate a new tail light mount. trailer is mobile so can be done in your work shop and the axel comes off easily so you can get around the section.

Read more

Table/leaner steel frame

Posted 2 weeks ago

I would like a steel rectangle frame made for a table top approximately 1100 x 1100 x 560

Read more

Portable metal oven base

Posted 1 month ago

I need to create a metal portable metal base for my pizza oven (the pizza oven weighs 70kgs) The dimensions of the oven are provided below. Height should be around 95-105 cms

Read more

Shed steel door frame fabrication

Posted 2 months ago

Hi, I need a quote on manufacturing a steel door frame for a garden shed made out of RHS. It can be galvernised or painted - whatever is cheaper. See attached picture for detail.

Read more

Oven side track needs welding

Posted 1 week ago

Oven side track pin needs to be welded. Oven side track with long pin is not fixed to the side track and needs to be welded.

Read more

Construction of walkway and platforms, and stairs

Posted 1 month ago

Fabrication of stairs, handrails, and walkways for installation at a remote location. Will require detailed engineering to exacting measurements as per a series of drawings. Will need to be hot dip galvanised. Time is of the essence - we are keen to identify an engineer who can get started within 5 days of award.

Read more

Rust in gate

Posted 5 months ago

Rust in gate as per photos and rejoin spikes and powder coat again

Read more

Recent fabrication reviews

With over 200,000 reviews in total, and an average rating of 9/10, you can be confident that your job will be handled with the utmost care.

Wheel needs welding on lawn mower

Work carried out by the owner/operator

25th June 2021

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Welding a spiral stair case back together

Work carried out by the owner/operator

24th September 2020

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Galvanised pole welding

Work carried out by the owner/operator

1st March 2021

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

cutting galv pipe

Work carried out by the owner/operator

6th December 2020

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Drum Furniture

Work carried out by the owner/operator

2nd September 2020

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Fix metal latch with bolt and stay.

Work carried out by the owner/operator

18th March 2021

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Pull up bar

Work carried out by the owner/operator

14th October 2020

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Small Welding Job

Work carried out by the owner/operator

17th September 2019

Workmanship
 4
Cost
 5
Schedule
 5
Communication
 5

caravan chassis repair

Work carried out by the owner/operator

2nd March 2020

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Find Fabricators in Christchurch

Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.

C

Clear Construct

Joined June 2017

Clear Construct are experts of building and glazing, Skylights, uPVC and aluminium windows and doors, repairing things made from wood. These could be wooden structures, furniture, shelves, rafters, cabinets, drywall, siding, dressers, door frames, beds, stairways, building frameworks, toughened glass, frameless shower, pool fences, balustrade, splashbacks and the list goes on. Do you need a ca...

Read more
L

Lewis Metalworks

Joined October 2020

Lewis Metalworks is a metal fabrication business based in Christchurch. Offering 15 years industry experience with a vast range of fabrication, sheet metal and welding services.

Read more
E

E welding Ltd

Joined August 2020

Hi, if you need any welding done, check how I might help. I have made and repaired trailers, made and repaired farm machinery parts, designed and built gates, worked on vehicles and worked as a rigger on steel construction sites. Ideas outside of the box are the most rewarding jobs.

Read more
N

NeedaFence

Joined October 2018

NeedaFence without breaking the bank? We can work with you to create your dream fence. Boundary fence, Front Fences, Custome Wooden and Aluminium Gate, No Problem! we do it all!

Read more
G

GRAB HIRE also trading as GCM BUILDING SERVICES

Joined March 2013

Hi my name ia Gary . I’ve got a Grab lorry that’s ready to grab your materials . I’ve also got a Komatsu 3 ton digger for your excavations . Quick prompt service. Collecting green waste Rubbish Concrete Soil removals I can also deliver I can also grab a load over a fence or deliver a load over a fence . I can transport 8 tons of concrete or soils Or ap40 The list is endless ....

Read more
P

Precision Waterjet Limited

Joined December 2019

Waterjet Profiling and cutting, engineering and fabrication, Steel supplies. tile cutting, glass cutting, garden architecture and outdoor artworks designed to your spec. Don't be put off by our low review number, we are new here but been in business in Christchurch for over 20 years with great references. Motor vehicle brackets, gussets and profile cutting. Ground loading airbag trailers d...

Read more
C

Christchurch All Trades

Joined November 2019

Welcome to Canterbury all trades where we have over 25 years experience in the concrete industry. As well as fencing, plumbing, painting. And general engineering We like to do big or small jobs and get involved in our community's. Get in touch for a great quote and excellent quality work. Look forward to hearing from you Regards Nikora

Read more
S

Supreme Services

Joined June 2019

Hi, As an owner/operator of Supreme Services, I have over 25 years experience in all aspects of Landscaping. I can design & build decking in both hardwood & softwood, pergolas and fencing in timber and coloursteel. I also undertake excavation, site clearance & levelling, and construct retaining walls. I lay paving, turf grass and synthetic turf. I install Shadesails either attached to or...

Read more
M

M&M Projects

Joined August 2018

Hi,iv'e been in building maintenance trade for the last 16 years. I specialise in the fields listed, with no job being to big or small. I pride myself on providing top quality workmanship at competitive rates. Getting the job done first time to the customers requirements.

Read more
N

Niven Welding & Fabrication

Joined November 2020

Hey there, My name is Ben and I have been working in the welding and fabrication industry for the past 10 years. I have experience in all welding processes and materials, especially Tig welding. I work to a high standard and stand by my workmanship. I always try my best to be competitive on pricing and try to save my customers money where possible.

Read more
B

Back Country Customs

Joined October 2019

Hi Im Benji , i have been in the building sector for many years . I specialize in all non structural renovations and all other handman jobs. I pride myself on delivering great workmanship at affordable prices and all work is quoted .

Read more
H

Hadleigh Lill Builders

Joined August 2010

I have been self employed for 9 years after completing my apprenticeship and continuing to work for other employers for a couple of years post qualification. I have completed many construction jobs including new houses, alterations and additions, landscaping, painting and tiling. I am prepared to undertake any size job from easing a door to building a new home. I work by myself which keeps comm...

Read more
F

Fix It Fox Handyman Services

Joined December 2020

No Job Too Small. Hands on Engineer. I have built a broad spectrum of residential and engineering items. I have a full suite of skills - fabrication, building, roofing, plumbing, drainage, electrical etc ie classical handyman who does well in all trades. Good tool base. Multiple trailers. Can cart 9m lengths. Engineers built the world.

Read more
Q

QS Consult NZ

Joined February 2019

Quantity Surveyor - Project Cost Estimates - Schedule of Quantities - Take-Off - Microsoft Project Programming. Registered MNZIQS - Sole Trader Consultant - Reasonable Rates .

Read more
E

Eur roofing ltd

Joined February 2021

The human mind is the limitation, roofing can be folded like origami more questions feel free to ask or check out cassbayhouse on Instagram or grand designs.

Read more
M

Mainland Landscape Construction

Joined June 2020

Hi all, my name is Scotty and i am a highly experienced and professional outdoor landscaping and construction contractor, very experienced in the whole process from the ideas and design phase through to the finished product, wether it is structural or non structural, big job or small job, simple or complex we have you covered, you can view my work on facebook if you search : Mainland Landscape Con...

Read more
L

LeroysFabrication

Joined August 2020

General engineer, Welding fabrication mechanic alloy, steel, stainless welding trade qualified Marine repairs and maintenance Dairy service technician Water pump experience Fibreglassing experience

Read more
P

PM Electrical

Joined February 2013

certified quality work done fast - experienced electrician 25yrs Specialise in residential Alterations Renovations, Additions & Upgrades. New Electrical installations Bathroom upgrades Kitchen upgrades Led Lighting upgrades Complete house rewires New switchboards or relocations. Switchboard replacement Under tile floor heating installation Extractor fans, rangehood install Bos...

Read more
W

Woodhouse Electrical

Joined June 2009

A two man team with over 700 jobs completed through Builderscrack over 10 years with the new top 100 or the old 5 star tradie certification every year. Note also licensed security technician. Trademe services also has more reviews available. Please note our minimum charge is 1 hr @ $75+gst for charge up work + admin Coc charge $25+gst however we charge no call out fees during regular business...

Read more
G

George Mallory Builders Limited

Joined February 2007

Hi - We've been building new houses and renovating old ones for the last 15 years. We've been in Christchurch for the last 10 years and have worked on jobs around the city as well as in regional parts of Canterbury. While we specialise in major renovations and new builds we also do smaller jobs from time to time - check out the photos below. We are very professional and work hard to meet deadlines...

Read more
Get started now! Post your job for free and find the right tradie. Post your job for free, now!