Trusted Fabricators.
NZ wide.
Sorted.

Learn more about the trades we cover.

Recent jobs posted

Check out how homeowners like you are using Fabricators on Builderscrack to build, repair and improve their homes right now.

Signage Frame

Posted 5 months ago

Hi, I am not sure under what category to post this under so I chose the closest that came in the drop-down box. Please refer to the 2 photos. Signage frame to be built as per the image with treated timber and plywood face

Read more

Rain water pipe welding

Posted 5 months ago

We would like to have someone to weld the rain water pipe which has broken.

Read more

Custom slim metal floating shelf

Posted 6 months ago

Im wanting a custom slim metal/steel floating shelf in my kitchen. It will be approx 3000mm wide by 400/450mm deep. It will need to be fixed to a standard gibbed wall with an (existing) tiled splash back below. I would like it to be in a brushed brass finish or powder coated to match my cabinetry- which is a Resene colour- forrest green. There is a range hood in the middle- see photos. One photo shows the space as it is now, the second shows a rough sketch of what I would like, and the third is...

Read more

Trailer Rebuild

Posted 2 months ago

Looking for someone to come to my place and weld new steel HRS and angles onto the frame of a trailer in the evening or weekend

Read more

Steel plate for driveway

Posted 2 months ago

Hi we would like a steel plate supplied and installed where our driveway meets the road. This is to stop vehicles scraping against the driveway l. Needs to be strong enough to take the weight of vehicles. Dimensions approximately 3.7m x 1.7m. Example shown below and have also included photos of our driveway.

Read more

Argentinean Grill

Posted 4 months ago

Looking for a fabricator that can make the attached charcoal BBQ. Its called a Santa Maria Grill that uses Charcoal as heating source. Has to be on wheels for ease of transport. Can discuss specifics when the right candidate is found Pic attached for reference.

Read more

Corten Steel Planter boxes

Posted 6 months ago

Good afternoon I would like to arrange a quote for getting 4 corten steel boxes made up similar to the attached photograph for a vegetable garden. Measurements: Length and Width: 1.3m Height: 50cm 3mm corten steel Please note we do not require a base, just the surround - they will sit directly on the soil (so the root system grows directly underground if that makes sense). Ideally with a small return on the bottom edge where a base would normally be. This helps them hold their sha...

Read more

Heatpress needs to be clamped

Posted 1 month ago

I have a heatpress and a gap has opened up which has caused uneven pressure when we heat press our tshirts only at the top.. this needs to be clamped down. Gapp needs to be closed. Hestpress is 15 x 15 Sorry I dont know proper terminology.. Send me your quote.

Read more

Steel Beams for 3 housea

Posted 3 months ago

Hi We are doing three residential houses in Beachlands in 2021 and need some structural steel work done. Please message if you will provide a quotation.

Read more

Duragal channel Portal

Posted 2 months ago

Fabrication and delivery of duragal steel channel portal frame

Read more

Weld repair gate

Posted 8 months ago

Steel gate has broken needs re welding

Read more

Entry Door Powder coat paint

Posted 6 months ago

Brand new entry door with original powder coat was spray painted for touch ups (Bottom half) with a wrong paint. This needs to be fixed . Thanks

Read more

Gate Hinges Broken #2

Posted 6 months ago

I have a swinging heavy metal gate that has sheered 2 of the 3 hinges. Need Someone affordable and quick to weld back up.

Read more

Quote for Mailbox Powder Coating

Posted 3 months ago

Hello there, Can I please get a quote to powder coat our mail box as attached? And, also your time frame on when can you commence and complete the work.

Read more

Metal Curtain rod

Posted 3 months ago

3 pieces of metal curtain rod 1 x 25 mm 2 x 22 mm diameter . Wanting one continuous rod about 3.15 m long. Strong enough to hold one heavy eyelet drape ( 2 curtains sewn tog). Do away with the centre bracket to support the drape. And in any case that centre bracket wud only open and close midway across the width of ranch slider door. Is it at all possible ?

Read more

Re-welding galvanised ballustrade

Posted 4 months ago

Hi have a galvanised ballustrade where one weld has broken and another has some rust. Would like someone to re-weld the joints to make sure it's safe before we repaint it. Will need to come onsite with welder

Read more

Heat press machine

Posted 5 months ago

the handle on my heatpress has bent and the handle needs go be welded on... Please text with quote

Read more

Welding repair needed.

Posted 8 months ago

My handle on my heatpress has snapped off. Need this welded back on please. Let me know your price.. under $100 would be great. But happy to pay Located wiri

Read more

Stainless Steel Protein Shaker

Posted 6 months ago

Hi, I'm looking for a fabricator to make a prototype of a stainless steel protein shaker within a week or two. I'm not sure of the cost so have just randomly chosen that price bracket.

Read more

Powder Coat Rangehood

Posted 7 months ago

Hi there, I need to powder coat a stainless 90cm island rangehood and the visible stainless ducting to the ceiling. It would be coated in black and it would be done before installation. ie I will deliver to you and pick up. thanks

Read more

Recent fabrication reviews

With over 187,000 reviews in total, and an average rating of 9/10, you can be confident that your job will be handled with the utmost care.

Extend depth of steel lockers

Work carried out by the owner/operator

17th August 2019

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Heatpress needs to be clamped


14th February 2021

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Hale Faiumu Garage Boxing Gym

Work carried out by the owner/operator

9th March 2019

Workmanship
 5
Cost
 4
Schedule
 5
Communication
 3

Gate Hinges Broken #2

Work carried out by the owner/operator

31st July 2020

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Signage Frame

Work carried out by an employee of the company

29th December 2020

Workmanship
 4
Cost
 5
Schedule
 5
Communication
 4

Find Fabricators in Manukau

Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.

G

GI & GM Contacting

Joined February 2020

Hi We have a team of builders/electricians/landscapers and handyman to handle all small to large projects around Auckland -Waikato Our director Greg has been Qualified building/site Manager for the last 10 years Our co-director Grant has Been a Qualified Electrician for the past 10 years We pride ourselves in doing a high quality job and clean and tidy work environment.

Read more
M

Magic Engineering

Joined December 2020

What we do! Magic Engineering Ltd is run and owned by John Tu'ungafasi. We specialise in custom welding, fabrication, and design for all grades of steel including, but not limited to stainless steel, mild steel, and aluminium. While doing that we have developed a reputation for providing outstanding work with attention to detail across the board. With over 10 years’ experience in the industr...

Read more
H

HaydenWills

Joined September 2013

I am licensed builder with 20 years experience in all aspects of building work including renovations bathrooms, kitchens, new builds, maintenance and repairs. I strive for the highest standard through out all my jobs and will always listen to clients needs and offer advise on all queries. I pride myself on finding the most cost effective solutions for all the big and small projects.

Read more
I

Ignite fabrications services limited

Joined February 2021

Hi , i have been a qualified welder / fabricator for over 20 years .I bring quality and detail and take pride with every job I do.I work hard to meet jobs at their deadlines with a high quality standard of workman ship with a free quote depending on how big the job is , you won't be disappointed from start to finish.

Read more
J

JJ Welding Services

Joined December 2019

Hi, I am an experienced welder/ rigger for almost 6 years. I am very professional in conducting myself especially dealing with people. I am a hard worker and always complete project on time. My price is very affordable.

Read more
H

Heavenly Gates & Light Engineering

Joined February 2021

Hi, we specialize in the manufacture of Gates, Gate automation, Fencing and Balustrading. We fabricate light engineered products as well. All electronics come with a warrantee and service to back up the product. We aim to deliver products of high standards and on time. Our pricing is fair and wont blow the budget.

Read more
F

Ferguson Construction

Joined September 2017

Hi I am a Qualified Builder that takes great pride in my work also have a great team of workers that can provide a excellent work effort in all ranges of work don't let the building boom trick you into getting dodgy workers that have no passion for delivering customer expectations I will deliver what you want we have great communication and time schedules on lock give me a message when you ready...

Read more
K

KFC Limited

Joined April 2010

Hi, We specializes in the construction of residential and commercial projects. Involving in new built, renovation, upgrade from small to large scale in Auckland region. We are extremely focused on the delivery of our construction projects to be completed in time with quality and on budget. Formed in 2015 and privately-owned company that is a strong, stable and reliable force in the constructio...

Read more
H

H AD ONS LIMITED

Joined July 2020

Newly established company within the Auckaland region. Focusing on landscaping, timber fencing, decking, repairs and maintance. We also construct sleep outs from $25995 excluding freight fees.

Read more
O

On Time Maintenance Ltd

Joined April 2019

Handyman , Repair and maintenance in general anything wood or steel works . House , gates fence ,decks , soft chemical wash and high pressure cleaning house , drive ways etc

Read more
C

Chandras welding & fabrication

Joined March 2016

Hi I've have being doing welding and fabrication jobs for the past 22 years . I specialise in all sorts of metal fence and gates. I work with steel ,louvres , Aluminium and all sorts of metal fabrications. I do automation for the gates include keypad, gate openers, video intercom, push button etc .I work with all the brands for gate openers such as Panasonic, LOCK MASTER,,CENTURION ,BFT, BENINCA...

Read more
L

LeroysFabrication

Joined August 2020

General engineer, Welding fabrication mechanic alloy, steel, stainless welding trade qualified Marine repairs and maintenance Dairy service technician Water pump experience Fibreglassing experience

Read more
S

Simpson trades

Joined November 2020

Hi, I've had an assortment of different trades throughout my 15 years in the trade industry, cabinet making, roofing, shed building, gib fitting, tiling, new building and renovations, ect. I put a lot of pride in my work and always make sure my customers are happy.

Read more
S

Salvadors Electrical Limited

Joined July 2017

REGISTERED ELECTRICIAN - EXPERIENCED - CONSCIENTIOUS - NEAT AWARDED - "Top-Rated Tradie 2019" by Builderscrack last 5 July 2019 Residential/Commercial/Industrial • electrical wiring • rewire • switch board upgrade • power points, safety switches, lightings • LED downlights, outdoor lights, security lights • Heatpump installation • Centralised Airconditioning and Heating • Ele...

Read more
M

Muster Brush Limited

Joined June 2017

Muster Brush specialises in everything to do with - Commercial and residential painting :internal & external - Maintenance jobs large and small -Plastering and renovation -Gib board Installation - Wall paper removal and hanging - Decoration: House & Shop, internally and external. We have 15 years of experience and we are looking to establish our name. Our jobs included sub-contracti...

Read more
C

Coastal Welding & Fabrication

Joined June 2019

Thanks for you time, we are a Welding & Fabrication Company based in Silverdale. We specialize in handrails, balustrades, gates and all forms of light fabrication. We have a fully equipped workshop and have had over 20 years in the industry, we like to think of ourselves as a boutique company giving that personal touch. We are fully insured and all of our staff carry a current site saf...

Read more
T

True Steel

Joined September 2020

Hi, True Steel LTD offer effective structural steel solutions for residential and light commercial projects. True steel will manufacture and install structural steel in your next build project. Working with your builder to efficiently and cost effectively erect steel on you next project. True steel meets all standards set out by the industry and employs qualified welders and tradesmen. Tr...

Read more
1

183 Designs

Joined July 2020

I’m been in the general welding industry for 6 years building my knowledge and skills, I’m Qualified and certified ready to take on general Metal projects. Been making outdoor furniture, gates, fences, trailer repairs and modifications but willing to try my hand at any job. With my honest and reliable personality and great work ethic I’ll ensure the work is done right. I pride myself on providin...

Read more
R

Raj Earthworks

Joined November 2019

We Do: General Earth Works, Post Holes 200,300,400,500,600mm+, Rubbish Removal, Excavation, Drilling Horizontal and Vertical, Repairs, Handyman Work.

Read more
G

Glen Welding & Fabrication

Joined July 2020

Certified welder ASNZS 9606 Welding of steel, aluminum, and can do stainless Certified limited electrical EAS ... Tool repairs and electrical test and tag.

Read more
Get started now! Post your job for free and find the right tradie. Post your job for free, now!