Trusted Fabricators.
NZ wide.
Sorted.

Learn more about the trades we cover.

Recent jobs posted

Check out how homeowners like you are using Fabricators on Builderscrack to build, repair and improve their homes right now.

Steel frame needs welding and needs new upright post

Posted 2 weeks ago

Welding and making new steel upright for existing frame. As this very old structure we need to keep as was so need to extend frame to end so no one can fall off landing.

Read more

Powder coating wire liner basket fo r kitchen sink

Posted 6 months ago

Cleaning and recoating wire basket for kitchen sink

Read more

Metal bed

Posted 11 months ago

Straightening bed support center rod

Read more

Small job to cut and weld motorbike centre stand

Posted 10 months ago

I bought this centre stand off the internet, it fits my bike but is too tall and needs 4 cm cut out of the two ‘legs’ The cross beam will need to be reattached for support. Probably best when re-welding to put a smaller diameter pipe inside each leg for strengthening the join.

Read more

4 designed UB Beams to fabricate

Posted 10 months ago

and 8 pfc lengths plus cross bracing Have drawings available

Read more

Alluminium roller gate frame

Posted 3 months ago

Need a frame for a roller gate constructed. Needed asap. Don't apply if you can't complete before Christmas.

Read more

Metal table frame - one broken leg.

Posted 2 months ago

Dining table leg needs welding. Metal. See photos.

Read more

Job is essential work

Posted 10 months ago

will attach photos of stainless and powder coated flashings that need to be made up, am working on reclad where owners are living inside . need flashings to secure and protect roof etc looking for summary quote so I can get general pricing, then a onsite final measure up.

Read more

Welding rotary clothes line

Posted 1 month ago

The top part of my clothesline has fallen apart. I want to get it welded back to one piece. Please see attached photos. Thanks!

Read more

Sandblasting and powder coating

Posted 3 months ago

I would like a quote to sandblast and powder coat small outdoor table and 4 chairs (in white)

Read more

Galvinised three tier seating frame.

Posted 8 months ago

We require a quote for a three tier galvinised seating frame to seat 35 children. In a semi oval shape with H4 seating. Installed. Ground prepared.

Read more

Custom flashings

Posted 9 months ago

Need a few flashings made up. Weld on end of 2 raking head flashings and a wall junction flashing. Would need site measure up and have plans with drawings.

Read more

Stainless Steel Balustrade

Posted 1 month ago

Extend the Stainless steel balustrades' height (currently approx 950mm) to compliant height (1100mm). The balustrades are located internally, within the house, and the final 'product' will need to be with a smooth / nice finish. The photos show only one balustrade; however the work involves other two balustrades.

Read more

Metal Bracket

Posted 7 months ago

Hi All I'm looking at getting a price for a metal bracket made out of Rectangular Hollow Sections 25x50x3mm. (Or something similar) Some high level drawings attached to assist. Long story short, it is 6 x 150mm lengths with some holes drilled in them, and one length of 800mm with two of the 150mm lengths welded on each end.

Read more

Downlight grills to be fabricated to fit existing downlight dishes.

Posted 4 months ago

We need 11 grills made. We have one original grill that can be used as the template. Please see the attached images. The grills are made out of metal. We are not fussy as to what metal the new ones are made from as long as they are of a similar thickness & strength & we can paint them the same colours as the ceilings they will go in. The aluminium downlight bodies are shown for reference. We don't need need these fabricated.

Read more

Powder coating floor vents

Posted 1 year ago

We have 6 metal floor vents for our ducted heating system that we would like re-powder coated.

Read more

Welding steel

Posted 3 months ago

Hi there, This is a residential renovation project that will start at the beginning of next year. There will be steel welding work involved. We'll invite you to come to our office to have a discussion with our architect this week. Dora

Read more

A-frame fabrication to hang a sign board

Posted 6 months ago

Hi, I got a sign board , 65 cm width, 34 cm height, 1 kg. I am wanting to hang this off a A-frame by using a chain. the board already has eye hook and chain attached to it. i just need the A-frame done. I can discuss further with you and send photos if you are interested.

Read more

Repaint/powder coating aluminium outdoor furniture

Posted 4 months ago

repaint/powder coating aluminium outdoor furniture

Read more

Container cutting

Posted 3 months ago

Need cutting container for putting windows and doors . Many thanks

Read more

Recent fabrication reviews

With over 186,000 reviews in total, and an average rating of 9/10, you can be confident that your job will be handled with the utmost care.

Steel Driveway Ramp

Work carried out by the owner/operator

17th November 2019

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Steel frame needs welding and needs new upright post

Work carried out by the owner/operator

18th February 2021

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

A-frame fabrication to hang a sign board

Work carried out by the owner/operator

29th August 2020

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Alluminium roller gate frame

Work carried out by the owner/operator

13th January 2021

Workmanship
 5
Cost
 5
Schedule
 5
Communication
 5

Find Fabricators in North Shore

Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.

L

LeroysFabrication

Joined August 2020

General engineer, Welding fabrication mechanic alloy, steel, stainless welding trade qualified Marine repairs and maintenance Dairy service technician Water pump experience Fibreglassing experience

Read more
O

On Time Maintenance Ltd

Joined April 2019

Handyman , Repair and maintenance in general anything wood or steel works . House , gates fence ,decks , soft chemical wash and high pressure cleaning house , drive ways etc

Read more
S

Speed Metal Ltd

Joined April 2019

Hi, I have been a metal fabricator for 15+ years. Have experience in any and all manners of fabrication from stainless steel benchtop and kitchen surrounds, to bi folding doors, to custom steel and aluminium flashings to name a few. Sheet metal, tube and extrusion. Aluminium, stainless and steel welding and fabrication.

Read more
M

Magic Engineering

Joined December 2020

What we do! Magic Engineering Ltd is run and owned by John Tu'ungafasi. We specialise in custom welding, fabrication, and design for all grades of steel including, but not limited to stainless steel, mild steel, and aluminium. While doing that we have developed a reputation for providing outstanding work with attention to detail across the board. With over 10 years’ experience in the industr...

Read more
H

H AD ONS LIMITED

Joined July 2020

Newly established company within the Auckaland region. Focusing on landscaping, timber fencing, decking, repairs and maintance. We also construct sleep outs from $25995 excluding freight fees.

Read more
S

Simpson trades

Joined November 2020

Hi, I've had an assortment of different trades throughout my 15 years in the trade industry, cabinet making, roofing, shed building, gib fitting, tiling, new building and renovations, ect. I put a lot of pride in my work and always make sure my customers are happy.

Read more
J

JJ Welding Services

Joined December 2019

Hi, I am an experienced welder/ rigger for almost 6 years. I am very professional in conducting myself especially dealing with people. I am a hard worker and always complete project on time. My price is very affordable.

Read more
H

HaydenWills

Joined September 2013

I am licensed builder with 20 years experience in all aspects of building work including renovations bathrooms, kitchens, new builds, maintenance and repairs. I strive for the highest standard through out all my jobs and will always listen to clients needs and offer advise on all queries. I pride myself on finding the most cost effective solutions for all the big and small projects.

Read more
K

KFC Limited

Joined April 2010

Hi, We specializes in the construction of residential and commercial projects. Involving in new built, renovation, upgrade from small to large scale in Auckland region. We are extremely focused on the delivery of our construction projects to be completed in time with quality and on budget. Formed in 2015 and privately-owned company that is a strong, stable and reliable force in the constructio...

Read more
T

True Steel

Joined September 2020

Hi, True Steel LTD offer effective structural steel solutions for residential and light commercial projects. True steel will manufacture and install structural steel in your next build project. Working with your builder to efficiently and cost effectively erect steel on you next project. True steel meets all standards set out by the industry and employs qualified welders and tradesmen. Tr...

Read more
C

Coastal Welding & Fabrication

Joined June 2019

Thanks for you time, we are a Welding & Fabrication Company based in Silverdale. We specialize in handrails, balustrades, gates and all forms of light fabrication. We have a fully equipped workshop and have had over 20 years in the industry, we like to think of ourselves as a boutique company giving that personal touch. We are fully insured and all of our staff carry a current site saf...

Read more
M

Muster Brush Limited

Joined June 2017

Muster Brush specialises in everything to do with - Commercial and residential painting :internal & external - Maintenance jobs large and small -Plastering and renovation -Gib board Installation - Wall paper removal and hanging - Decoration: House & Shop, internally and external. We have 15 years of experience and we are looking to establish our name. Our jobs included sub-contracti...

Read more
G

Glen Welding & Fabrication

Joined July 2020

Certified welder ASNZS 9606 Welding of steel, aluminum, and can do stainless Certified limited electrical EAS ... Tool repairs and electrical test and tag.

Read more
R

Raj Earthworks

Joined November 2019

We Do: General Earth Works, Post Holes 200,300,400,500,600mm+, Rubbish Removal, Excavation, Drilling Horizontal and Vertical, Repairs, Handyman Work.

Read more
S

Salvadors Electrical Limited

Joined July 2017

REGISTERED ELECTRICIAN - EXPERIENCED - CONSCIENTIOUS - NEAT AWARDED - "Top-Rated Tradie 2019" by Builderscrack last 5 July 2019 Residential/Commercial/Industrial • electrical wiring • rewire • switch board upgrade • power points, safety switches, lightings • LED downlights, outdoor lights, security lights • Heatpump installation • Centralised Airconditioning and Heating • Ele...

Read more
G

GI & GM Contacting

Joined February 2020

Hi We have a team of builders/electricians/landscapers and handyman to handle all small to large projects around Auckland -Waikato Our director Greg has been Qualified building/site Manager for the last 10 years Our co-director Grant has Been a Qualified Electrician for the past 10 years We pride ourselves in doing a high quality job and clean and tidy work environment.

Read more
H

Heavenly Gates & Light Engineering

Joined February 2021

Hi, we specialize in the manufacture of Gates, Gate automation, Fencing and Balustrading. We fabricate light engineered products as well. All electronics come with a warrantee and service to back up the product. We aim to deliver products of high standards and on time. Our pricing is fair and wont blow the budget.

Read more
C

Chandras welding & fabrication

Joined March 2016

Hi I've have being doing welding and fabrication jobs for the past 22 years . I specialise in all sorts of metal fence and gates. I work with steel ,louvres , Aluminium and all sorts of metal fabrications. I do automation for the gates include keypad, gate openers, video intercom, push button etc .I work with all the brands for gate openers such as Panasonic, LOCK MASTER,,CENTURION ,BFT, BENINCA...

Read more
F

Ferguson Construction

Joined September 2017

Hi I am a Qualified Builder that takes great pride in my work also have a great team of workers that can provide a excellent work effort in all ranges of work don't let the building boom trick you into getting dodgy workers that have no passion for delivering customer expectations I will deliver what you want we have great communication and time schedules on lock give me a message when you ready...

Read more
A

Adam Gutteridge

Joined August 2020

Hi, I have been welding and fabricating for over 10 years, Happy to make custom fabrications or repairs for you. Mild steel , Stainless steel , and Aluminium.

Read more
Get started now! Post your job for free and find the right tradie. Post your job for free, now!