Trusted Surveyors.
NZ wide.
Sorted.
Learn more about the trades we cover.
Independent, trusted local surveyors ready to do your job NZ wide
Builderscrack has a fresh approach to finding great surveyors. You tell us what you need done and we tell our trusted independent tradies about your job. In no time you've got great pros to choose from.
To see tradespeople and reviews in your area, select your district below.
North Island North Island see all
Recent jobs posted
Check out how homeowners like you are using Surveyors on Builderscrack to build, repair and improve their homes right now.
Geotech Engineer and Report Required
Posted 3 hours agoWe need someone to carry out an investigation in New Lynn. We are doing DD on a property that already has a recourse consent and building consent. The issue is the report that the consents are based on is very light ie one shallow bore hole. The construction area is 450m2 and is in a floodplain we hope to redesign and provide a better solution. Our Engineer requires a more thorough investigation to allow him to plan for a new proposal. For us Settlement is in 30 days so we need a consultant th...
Read moreValuation on completed renovation project
Posted 6 hours agoQuote request to present a valuation of a property and a valuation on completed renovation project. I've met a few contractors and estimated a full refurbish of the property for around 100k. If you can help with some advice please give me a ring ...
Read moreRemoving load bearing wall
Posted 7 hours agoWe wouldnlike yo take out the wall between the kitchen and lounge to have open plan. This is a load bearing wall.we have been told. The wall is 5.3 metres long. Thanks :)
Read moreFeasibility of site for building new house
Posted 1 day agoHI I have an old house in hillsborough on a crosslease title. Would like advice on how to go about building a new house. Advise on what issues to expect as regards to driveway, drainage.
Read moreNew House
Posted 2 days agoLooking for a structural engineer for a new house design in Churton Park, Wellington. The scope will mainly include, concrete foundation, beams, bracing and preparation of council documents with PS1 and construction monitoring/PS4. The design is still in the concept stage and looking to finalize and go for the structural design in 6-8 weeks time.
Read moreBoundry peg property
Posted 2 days agoI have a previous survey on file showing the points requiring physical pegging. 5 total. Available any time
Read moreDriveway #2
Posted 5 days agoWanting the following: 1 - Detailed plans, including: - a site plan(s) that shows the existing topography and where proposed cut or will be carried out - elevations and cross sections of the proposed cut or fill details of any proposed retaining structures. 2 - An environmental effects assessment of the earthworks, including: - An assessment of the earthwork's visual effects, and proposed mitigation measures. - How land stability on and next to the site will be maintained. If t...
Read moreWorkbench weight certification
Posted 6 days agoWe have workbench at our worksite which requires maximum weight rating. All details of the table mentioned as per attached photo. As per the work safety requirement , we require the maximum safety rating stamping from a certified engineer.
Read moreWorking drawings
Posted 1 week agoEQC has done the initial servy and report for a land slip and repair suggestion are given by them. Additional demage and work along with the EQC suggestion working drawings are required. No obligation site visit will be helpful.
Read moreNew subdivision land on Amesbury Drive in Churton Park, work consistent
Posted 1 week agoItems required: • Survey with 500mm maximum height inteval lines for archtect to acuratly model the site, survey points height helpful to model the site. • Show where fall in the back of the section is • Existing services • Boundary and pegs points
Read moreEarthworks Management Plan review for council
Posted 1 week agoReview needed to be completed after being let down by our existing Geotech Engineer. We have completed the plan and need it reviewed by a Geotech Engineer before we can start. We have completed plans before and had them signed off but have been waiting 3.5 months and can't wait any longer. This is a staged subdivision so would like to start a relationship with someone that can continue into the future. Photo of first 2 houses that have been completed now. We have the original geotech report...
Read moreNew house #3
Posted 1 week agoHi I'm after an exposed truss design for a gable end which projects 2 meters from the house.
Read moreEastern boundary
Posted 1 week agoSurvey of Eastern boundary at Seaview Road Piha. Property run s through to Piha Road Piha
Read moreUmuhapuku Block
Posted 1 week agoEstimate or quote to survey the internal boundaries of Umuhapuku Blocks i.e. 2A - 2F. We already have one from Donaldsons. We need two more.
Read moreHighbury rd
Posted 1 week agoGeo report for new garage slab location. Easy access next to driveway.
Read morePapakainga Project
Posted 1 week agoOur whanau Trust are proposing to build 11 homes on whanau land, under a papakainga project. We would like to know which area is build able and can be done to accommodate 11 houses. The land has a sloping contour then plateaus out to relatively flatter area which is set back slighlt further from main road. Also we appreciate you providing a idea of what this service would cost? Please Note: We are in the discussion phase with regards to the papakainga scheme. Estimated time frame 10...
Read moreCracked brickwork
Posted 1 week agoHi, I have noticed some hairline cracks in the brickwork which has previously been stitched and also a crack in the foundation wall which had been repaired prior to me purchasing the property. I did remove trees from the property as had an inital crack which closed up once the trees were removed and has not moved since. Keen to get someone out to review and assess what is causing the cracks and whether it is serious. The property is on clay and there is movement in summer and winter months.
Read moreSurvey land for purchase of land from neighbour
Posted 1 week agoWe're wanting to purchase a strip of land from a neighbour to widen our drive and need surveying done for this.
Read moreMissing pegs
Posted 2 weeks agoHi there, We need to relocate three missing boundary pegs of our property. There is a current survey plan to the existing building dated Nov 2011.
Read moreRecent surveying & engineering reviews
With over 146,000 reviews in total, and an average rating of 9/10, you can be confident that your job will be handled with the utmost care.
Subdivision
Work carried out by the owner & subcontractors
3rd October 2019
Boundary pegs
Work carried out by an employee of the company
30th September 2019
Boundary set-out
Work carried out by the owner/operator
29th September 2019
GeoTech Report Required for new build
Work carried out by an employee of the company
6th September 2019
Sub division project.
Work carried out by the owner/operator
3rd September 2019
Boundary peg to be located
Work carried out by the owner/operator
13th August 2019
Geotech report needed
Work carried out by the owner/operator
4th August 2019
Alex Kirkham
Work carried out by an employee of the company
10th July 2019
Pre Purchase Geotech report of Cliff top property
Work carried out by the owner/operator
5th June 2019
Rudsdale property 117 SH 33 Tikitere, RD4 Rotorua
Work carried out by the owner/operator
30th May 2019
Mark out building site for house extension
Work carried out by an employee of the company
12th April 2019
Boundary Peg Locations
Work carried out by the owner/operator
11th April 2019
Pool install
Work carried out by the owner/operator
28th March 2019
subdivision
Work carried out by a subcontractor
14th March 2019
Geotech Report
Work carried out by the owner/operator
26th February 2019
Boundary Measure
Work carried out by the owner/operator
19th December 2018
House Location Survey - Weymouth
Work carried out by the owner/operator
17th December 2018
Renovation QS required
Work carried out by an employee of the company
19th November 2018
