Trusted Marine Specialists.
NZ wide.
Sorted.
Learn more about the trades we cover.
Recent jobs posted
Check out how homeowners like you are using Marine Specialists on Builderscrack to build, repair and improve their homes right now.
Yacht painting #3
Posted 1 year agoTo paint the hull and top sides of a 30 foot trailer sailer. Construction is glass over strip cedar. Boat is sound. Timeframe flexible.
Read moreOutboard motor service
Posted 1 year agoWould like our Haines Hunter 535 serviced please. Has a Yamaha 115 on the back.
Read moreYacht painting #6
Posted 1 year agoTo paint the hull and top sides of a 30 foot trailer sailer. Construction is glass over strip cedar. Boat is sound. Timeframe flexible.
Read moreAluminium boat welding
Posted 7 months agoWeld and seal an aluminium boat floor on a 5.8m Ramco Fishmaster.
Read moreFibreglassing transom extension mould
Posted 2 years agoWe have constructed a timber mould of a transom extension for displacement launch. Size 4000x900x450mm To be made in Polyester Fibreglass Has two dividers for additional support and some stiffness to be glasses in during laminations. Has a Flange of approx 40mm around too so the kid can be glasses on at a later date. Thickness will end up around 10mm but would like some input regarding this. Since this picture we have cover and filled the corners, gaps and screws plus the top flange.
Read moreBoat hull repair...fibreglass
Posted 1 year agoi need a 40cm crack in the fiberglass hull repaired
Read moreSeanymph paint
Posted 2 years agoI have a 19ft Seanymph commander that needs to be painted white with a black stripe. 90% of prep has been completed.
Read moreYacht painting #5
Posted 1 year agoTo paint the hull and top sides of a 30 foot trailer sailer. Construction is glass over strip cedar. Boat is sound. Timeframe flexible.
Read moreEngine conversion
Posted 2 years agoI have a 2005 straight 6 engine that I’d like to put in a boat.
Read moreBottom of fibreglass boat patched and painted
Posted 1 year agoNeed hull checked any fibreglass repairs done and repainted. Boat is currently in Moana but will bring back to CHch for repairs and painting. I do also need the bilge pump checked. I am unsure of expected cost at this stage but will do some research around that.
Read moreOutboard service 2
Posted 3 years agoGood afternoon I am after a price for 2 stroke oil for my Evinrude ... hp engine. I would also like to know a average price for a service for the engine Thank you
Read moreYacht painting #4
Posted 1 year agoTo paint the hull and top sides of a 30 foot trailer sailer. Construction is glass over strip cedar. Boat is sound. Timeframe flexible.
Read moreYacht painting #2
Posted 1 year agoTo paint the hull and top sides of a 30 foot trailer sailer. Construction is glass over strip cedar. Boat is sound. Timeframe flexible.
Read moreYacht painting
Posted 1 year agoTo paint the hull and top sides of a 30 foot trailer sailer. Construction is glass over strip cedar. Boat is sound. Timeframe flexible.
Read moreEngine overheating. Possible water impeller replacement
Posted 1 year agoMy engine overheated first time out. From my googleing my guess is that water impeller is fried. Need replaced ASAP. Engine a 60hp johnson early 90s I think.
Read more... stabicraft with water in pontoons
Posted 2 months agoI have an older stabicraft that I can hear water sloshing around in the pontoons I think. I think I heard it last year but a year in it’s gotten worse. (Heavier and noisier) I can’t see any obvious cracks or leaks, and nothing comes out the bung. I have been storing it on my drive for about two months and I did notice rain water pooled on the floor board cause I didn’t have it bow up enough to drain.
Read moreFind Marine Specialists in Christchurch
Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.
Onsite Welding Ltd
Joined April 2016Onsite Welding Ltd specializes in construction welding on site. With 14 years experience in all forms of welding, onsite welding prides itself with workmanship to a x-ray certifiable standard (Aus/Nz:2980) Christchurch rebuilds repairs and new builds, ship and boats - alloy and steel, heavy transport - alloy and steel, hard facing/repairs of earth moving machinery. Complete site management avail...
Read moreLeroysFabrication
Joined August 2020General engineer, Welding fabrication mechanic alloy, steel, stainless welding trade qualified Marine repairs and maintenance Dairy service technician Water pump experience Fibreglassing experience
Read moreSteve Robinson
Joined February 2019I started working as a gardener/ landscaper in my teens. I spent a few years building boats and running a waterblasting business, then went back to landscapng and got a certificate in Landscape Design. I enjoy helping people create spaces they like being in.
Read moreDrake Pacific Contracting
Joined November 2019Drake Pacific Contracting specialises in remote access ground stabilization, anchoring and equipment repairs and service. We pride ourselves on craftsmanship and efficiencies.
Read moreClear Construct
Joined June 2017Clear Construct are experts of building and glazing, Skylights, uPVC and aluminium windows and doors, repairing things made from wood. These could be wooden structures, furniture, shelves, rafters, cabinets, drywall, siding, dressers, door frames, beds, stairways, building frameworks, toughened glass, frameless shower, pool fences, balustrade, splashbacks and the list goes on. Do you need a ca...
Read moreGeorge Mallory Builders Limited
Joined February 2007Hi - We've been building new houses and renovating old ones for the last 15 years. We've been in Christchurch for the last 10 years and have worked on jobs around the city as well as in regional parts of Canterbury. While we specialise in major renovations and new builds we also do smaller jobs from time to time - check out the photos below. We are very professional and work hard to meet deadlines...
Read moreA & K Contracting
Joined September 2016Hi, I joined Builders Crack whilst building, our family home after the Earthquakes. I have spent 15 years in joinery shops and can build anything made of wood.. I have a small joinery workshop and all the tools to build Decks, Fences and Gates to a high standard. Very capable handyman. Gutter Cleaning with Industrial Vacuum Machine, No Mess, Fuss No Job to small You won't be disappointed...
Read moreRWI Ltd
Joined October 2014For the past 25 years I have had great success operating excavator's in all fields from tree felling to major excavation's and demolition work on the West Coast. Now living in the Canterbury region I can offer specialised excavation and remedial work at a competitive rate.
Read moreFix It Fox Handyman Services
Joined December 2020No Job Too Small. Hands on Engineer. I have built a broad spectrum of residential and engineering items. I have a full suite of skills - fabrication, building, roofing, plumbing, drainage, electrical etc ie classical handyman who does well in all trades. Good tool base. Multiple trailers. Can cart 9m lengths. Engineers built the world.
Read moreLimitless Property Services
Joined December 2019Hi there, Dan, owner operator of Limitless Property Services. Currently providing the Canterbury region with complete building and landscaping works. -Qualified LBP builder (Licensed Building Practitioner accredited) with over 15 years experience in carpentry. -Skilled excavator operator with over 3 years experience in landscaping and heavy civil works. With our own truck, digger and bu...
Read moretradie
Joined November 2012Electrical install , maintenance and repairs; heat pump install，rapair and maintenance services phone and data cabling; Freeview Aerial and satelliate install and services; Burgular alarms and intecom,CCTV,access system install and repair; Motel and Hotel MATV system Home theater install. Range hood supply and installed hot water cylinder electrical repair. Coffee machine repairs. Ga...
Read moreBoat Builder
Joined May 2020I am a NZ qualified Boat Builder. I have a passion for wood work, bespoke interiors, cabinet making & boat building. I have over 10 years experience in the marine industry, including several super yacht builds and many smaller boat builds or refits done with pride to a high standard.
Read more