Trusted Marine Specialists.
NZ wide.
Sorted.

Learn more about the trades we cover.

Recent jobs posted

Check out how homeowners like you are using Marine Specialists on Builderscrack to build, repair and improve their homes right now.

Inside alteration

Posted 1 month ago

We are looking at removing or reducing the shelf and trim on either side of the forward triangle bunk to make it more spacious on a 37" yacht. Photos available on request

Read more

Yacht hull repair - Insurance job

Posted 10 months ago

Repair to GRP cedar core hull. Requires damaged section removed and replaced and painted. Some internal finishing. Damaged section approx 70cm x 40cm port bow. Insurance Quote and date for repair required ideally within next 3 weeks

Read more

Mobile service of Maxum sr185 #3

Posted 1 year ago

We have a maxum 185 Sr with a 4.3l inboard mercruiser engine with a stern drive. It has been winterised for 2 years and the engine and stern drive need a good service and want it peeped ready for summer _- ideally done at our house

Read more

Hull repair and paint

Posted 8 months ago

Scarf joint of one skid has cracked. Hull badly scrapped on trailer in bad landing. Part of Brass keel strip broken on 5.6m Wooden hull boat.

Read more

Rudder Rebuild

Posted 3 months ago

Prefabricate a 26 foot Keller Rudder

Read more

Rug

Posted 10 months ago

Large size rug trim tear to be repaired

Read more

Repair and Restoration

Posted 1 year ago

Some structural timber and fibreglass repairs on a 20’ Glass Marlon cabin cruiser.

Read more

Perspex window replacement

Posted 11 months ago

Need to replace a 2x tinted perspex windows. First is about 2m x 1.2m on starboard side. Second is about 500mm x 500mm for the front hatch.

Read more

HARDTOP CONVERSION

Posted 5 months ago

Require alloy hardtop and windscreen fitted to six metre run about as an alternative to the existing soft windows.

Read more

Boat Rudder and tiller repair

Posted 10 months ago

I am looking for someone to help to build a rudder and a tiller for my keeler boat. The boat is moored in Hobson bay in Auckland (near Orakei Marina) and after a big storm, the rudder broke completely and drifted away... The only piece left is a broken tiller. The boat is a Class Cavalier 26 and it's moored in Hobson Bay. The metallic part that kept the rudder attached to the boat broke as well so need replacement. I need someone who is able to build a rudder including the part that will allow...

Read more

Exterior sun covers for windows on boat

Posted 6 months ago

Need sun covers for front windows as in pictures for boat. Am available whenever you are to discuss the job. The boat is same in picture so need exactly whats in picture. Need others things done too so if price right happy to proceed.

Read more

Paint wooden yacht decks and cabin exteriors

Posted 10 months ago

We require the stripping back and preparation for painting of the decks and cabin exteriors on our 30-foot wooden yacht. Currently berthed at Half Moon Bay Marina I'm planning on bringing it ashore at Okahu Bay for this work. Ideally I'd like a painter who has some experience in working on wooden vessels and is familiar with marine paint products. Lifting the boat is not scheduled yet but would like to see this work completed in October or November (obviously weather dependant).

Read more

Repair hairline crack

Posted 11 months ago

A few hairline cracks on the gel coat around the windscreen of a boat. A few cracks on the ceiling of bathroom of a boat.

Read more

Seastar Steering Kit installed and possible fibreglass work

Posted 9 months ago

Old steering kit seized up so I removed the old kit and purchased a SeaStar Quick connect kit. But due to the design being quite different it doesnt line up as easy as initially thought. There is limited space around the engine bay for the steering cable to extend. Also the Hull may need some attention as it isn't evenly distributed on the trailer and there is too much force at the front of the boat which has created some indents. Best to be viewed in person

Read more

Wooden Boat Repainted Inside and Outside

Posted 5 months ago

Hi there. We are looking at purchasing a 35ft wooden boat. Still to come up from Porirua. Seeking quotes please on interior repaint. Already good paint job in place but needs colour change. Also exterior repaint on top half only. Below water line not required. Possible time frame arriving in Auckland 3-4 weeks time. Could be painted at Halfmoon Bay or Okahu Landing. To be ascertained. There is also one wall in kitchen area needing a glass window installed prior to painting. Thanks...

Read more

Mobile service of Maxum sr185 #4

Posted 1 year ago

We have a maxum 185 Sr with a 4.3l inboard mercruiser engine with a stern drive. It has been winterised for 2 years and the engine and stern drive need a good service and want it peeped ready for summer _- ideally done at our house

Read more

Fitting of an Airmar through Hull Transducer to a Pelin Launch

Posted 9 months ago

Fairing block fitted and glued , transducer fitted while the Boat is on the Floating Dock for the day and night of November ...

Read more

Raw pump

Posted 7 months ago

Raw water pump replace or repair - volvo 22hp - leaks at the weep hole probably needs all new seals - impala is fine

Read more

Boat build and design

Posted 4 months ago

Quote for a James Wharram 10m, fibreglass over ply Catamaran, and remodeled design of a catamaran similar in size and shape as discuss.

Read more

Alloy boat corrosion repair

Posted 8 months ago

I have about 4 spots of corrosion on the transom of my tinny that will need to be plug welded up

Read more

Find Marine Specialists in Auckland

Our trusted tradies will respond to your job, often within a few minutes. You decide who you want to communicate with. You’re in control the whole way.

A

AG Metalwork

Joined August 2020

Hi, I have been welding and fabricating for over 10 years, Happy to make custom fabrications or repairs for you. Mild steel , Stainless steel , and Aluminium.

Read more
R

RedwoodEngineering ltd

Joined June 2019

Hi we have been providing engineering solutions for NZ for over 50 years . Key aspect is our ability ask relevant questions and come up with a effective and economical solution

Read more
A

A T Painters ltd

Joined May 2020

Hi, we recently started a business about a year ago after working in the painting trade for about 15 years, we have experience in small and large jobs, interior, exterior, new builds, repaints, commercial and residential. we also pride ourselves on getting the job done within deadlines and meeting budgets, we are a friendly team who cares about the finished product.

Read more
T

The Renovinators Ltd

Joined September 2015

On Time, On Budget, always tidy up ! Our specialty in renovating old house / villa with a team of skillful and qualified chippy, painters, tilers, plasterers, and plumbers. Combined experience of over 100-year ! Very competitive quotes ! No job is too small for us.

Read more
J

JCE Water Blasting Limited

Joined March 2019

JCE Water Blasting is a family owned business, and we pride ourselves on making our customers feel part of the family. No matter what service you’re looking for, we guarantee to not only meet, but exceed your expectations and ensure your full satisfaction.We do full House Washes,Driveways,Gutters,Decks,Boats,Heavy Machinery and lots more , you name it we will clean it no job is to big or to small...

Read more
O

Oncore Auckland Central

Joined November 2019

Oncore is New Zealand's leading team for residential and commercial repairs, maintenance, insurance work, and installations. Whatever the job, we can get it done. The Oncore process ensures your project is delivered to a high standard, on time and within your budget. From your first consultation, through to project completion, Oncore provides one point of contact. This means no managing m...

Read more
K

Kyle Air Limited

Joined June 2020

Hi Jon here I am a NZ Qualified Refrigeration engineer You will have the benefit of my 30 + years of experience and the piece of mind that I am fully insured and offer friendly and personal advice We get it right the first time

Read more
C

Condon Marine Services

Joined May 2019

Over 15 years experience in building, repairs, customising and maintaining boats from trailer boats to superyachts. We cover a large scope of work so get in touch for an obligation free quote.

Read more
L

LeroysFabrication

Joined August 2020

General engineer, Welding fabrication mechanic alloy, steel, stainless welding trade qualified Marine repairs and maintenance Dairy service technician Water pump experience Fibreglassing experience

Read more
J

Jay Marine

Joined February 2021

Established in March 2019, and with 20 years of experience, Jay Marine is a leader in the industry for reliability, skill and knowledge. Based in Gulf Harbour, Auckland, we operate both within the marina and wherever is best for you. Mobile, friendly and professional, we specialise in providing quality work for a range of boats. Jay Marine can manage your projects from start to finish. Get...

Read more
P

Polished marine valet services ltd

Joined January 2021

Hi I have a background in boat building and boat Valet and have recently started a Boat valet business after renovating to homes I am using all my skills to get a regular income well I build my new business. Look forward to working with you Kind regards Brittany

Read more
C

Chapman Concrete

Joined September 2017

.CHAPMAN CONCRETE. Chapman concrete is a new business but has 10 years experience behind it. We are a small team that does all the smaller jobs that the big timers don't have time to do. 9pmProfessional honest reliable hard working and a eye for detail with unbeatable prices, our suppliers give us the best rates which we hand on to you to help keep pricing low! If its to do with concrete Chapman...

Read more
D

Devon Timber Windows

Joined February 2010

We are a boutique joinery business specialising in timber: repairing, restoring and where necessary rebuilding timber windows and doors. We restore original timber joinery to bring windows and doors to a modern standard taking it from the ‘shake and rattle’ of poor fitting joinery to give you a warm, cozy and quiet home. Our latest offering is Thermawood retrofit double glazing which gives the...

Read more
I

Interiors by Innovation Ltd

Joined September 2012

Our company manufacture and install Custom Build Furniture, Kitchen /Bathroom/Laundry Cabinetry, Staircases and Shopfitting for the Domestic/Commercial and Marine Industry. My personal experience stretches over 25 years in Reproduction of Antique Furniture, Custom Build Interiors and Yacht Interiors. We guarantee high quality workmanship, a staunch comittment to meeting our deadlines, excellent re...

Read more
B

Boat Builder

Joined May 2020

I am a NZ qualified Boat Builder. I have a passion for wood work, bespoke interiors, cabinet making & boat building. I have over 10 years experience in the marine industry, including several super yacht builds and many smaller boat builds or refits done with pride to a high standard.

Read more
D

Dna Engineering ltd

Joined June 2018

I have been fabricating for over 20 years in the greater auckland area. Im a Structural engineer by trade but also have a wealth of experiance in archatectural stainless steel, aluminium brass and copper sheetmetal work which I now specalise. Machining and the fabrication design and manufacuring process. I produce high quality items at a reasonable price. I also lend my hand towards any type of d...

Read more
Z

Z Maintenance

Joined July 2020

From the smaller day to day repairs and ongoing maintenance through to major works and upgrades, Z Maintenance can manage all your home & business maintenance needs. We take care in preparing your property on behalf of business owners, property managers and real-estate agents to look and function at its best. If you are in the process of selling, renovating, moving sites, commencing or ending...

Read more
S

Simpson trades

Joined November 2020

Hi, I've had an assortment of different trades throughout my 15 years in the trade industry, cabinet making, roofing, shed building, gib fitting, tiling, new building and renovations, ect. I put a lot of pride in my work and always make sure my customers are happy. I am a volunteer firefighter and might get called out in the early morning, this might affect the time and schedule we agree on, I wil...

Read more
K

Kapowai Works

Joined September 2020

Hi- I'm a carpenter and cabinetmaker with 25+ years in the woodworking and related trades over in the USA. My primary expertise is in higher-end cabinetry and related renovations. I worked a decade on superyachts (over 30m long) so have an eye for detail and skills to match. Have also done some out-of-the-norm work in related fields: shop-fitting for themed interiors, set-building for thea...

Read more
S

Spartan Welding & Diving Ltd

Joined May 2019

Hi, Spartan Welding & Diving is a team of 4 looking for new exciting opportunities. Certified Rigger Welders (with insurance cover) Our goal is customer satisfaction. We pride ourselves on delivering your project on time and within budget

Read more
Get started now! Post your job for free and find the right tradie. Post your job for free, now!