Recent jobs

I need a small handrail from the side garage door alongside the garden

Posted 1 week ago

Repair existing steel balustrades

Te Atatu Peninsula, Waitakere

We have 4 steel balustrades that we want to ADD an extra rail on to the height of them for safety reasons

Posted 2 weeks ago

Small job cutting sheetmetal for flashings

Other (Fabrication)

I want five pieces of sheet metal cut to be flashings to hide the masonry wall connecting my wooden fence. I have the metal (see the picture). The first piece is 8cm wide, 81cm long, folded 90 degrees, 4cm along the long edge (see drawings). The second piece is 8cm wide and 86cm long, folded 90 degrees, 4cm along the long edge (see drawings). The third piece is 4cm wide and 90cm long (see drawings). The fourth piece is 9cm wide and 23cm long, folded 90 degrees, 4cm along the long edge. Also...

Posted 2 weeks ago

Railing for front of house beside steps up to front door

Handrails & Staircases

Henderson Valley, Waitakere

Need a safety railing installed at side of house, beside front steps, for my elderly mother. The wall of the house where the railing needs to be installed has clinkerbrick attached. See photo.

Posted 2 weeks ago

Ute Canopy alteration

Other (Fabrication)

Hi there, I am looking for some help create/setup a sliding/removal canopy barrier for a Ute canopy. I often travel with equipment and dogs at the same time, and want to seperate the two from each other, ideally something which can be removed, open to options, but want to do this at a budget. I’ve attached a couple of photos for ideas, but am open to options! Thanks!

Posted 3 weeks ago

Outdoor Steel Beam Rust

Remove 5m steel beam, remove rust, paint and reinstall,

Posted 1 month ago

Welder

needing a new tensioner made up to mount the motor so the The pulley can still be used. For installation of a new motor for a small merry go round

Posted 1 month ago

Powder coating Front Door

Hobsonville, Waitakere

I have a front door that is a colour I’m not keen on, looking to changing it, it is only a 2 year old door, aluminum, measures 2metres high 90cm wide.

Posted 4 months ago

Galvanized Steel Signage Frame

Other (Fabrication)

Henderson, Waitakere

We need a frame made for a 2.4M x 1.2M sign. Shop drawings available.

Posted 6 months ago

Wood burner stove seam weld

Seam on wood burner stove has been corroded - can be resealed with a welding patch.

Posted 6 months ago

Cricket mobile nets needs new steel rod to pull the nets

Site Welding

Cricket mobile nets needs new steel rod to pull the nets We also need two new wheels installed as well in the front

Posted 7 months ago

Weld repair for silver anodised heavy duty aluminium umbrella frame

Site Welding

We have an outdoor umbrella that has snapped and are hoping it can be repaired as otherwise it’s in perfect condition

Posted 8 months ago

Welding trailer hinge

Te Atatu Peninsula, Waitakere

The hinge that connect to the trailer structure has a big Crack in it. Needs to be welded

Posted 8 months ago

Fibreglass a chest freezer to make ice bath

Fibreglass

Hi I have a brand new 420l Chest freezer that I want to convert to a ice bath cold plunge. Need someone who can fibreglass the inside to waterproof it

Posted 8 months ago

Mango and Fejoas home

West Harbour, Waitakere

We have a large bird cage that is quite rusty and would love a quote to power quote, as been pulled apart already

Posted 9 months ago

Repair Metal Tramp Legs

Massey, Waitakere

After someone with metalwork experience/capability to repair the bottom of the four tramp legs which have corrode where they were in contact with the ground. Now that corrosion has been removed there is very little material left (holes in places). Need a metal sleeve or similar to cover the bottom of the four tramp legs. Legs are u-shaped and made of galv pipe

Posted 9 months ago

Stainless sheet.

Massey, Waitakere

I’ve attached a picture of something I need made for me. It’s 3 pieces of stainless steel welded together. I’m hoping that, because it’s a simple shape, someone might be able to do it before Xmas? Cheers James

Posted 9 months ago

Tig weld small stainless pipe to lid

Need a competent stainless tig welder to weld 2 10mm tubes through a 5mm lid on a fermenter.

Posted 9 months ago

Clean & powder coat outdoor aluminium garden furniture

I have 3 Endersley chairs and the legs (only) of a singer sewing machine to be powder coated. Interested in quotes to see if it is worth doing

Posted 10 months ago

Overhead power cable bracket

Hi, We are upgrading our overhead power main cable entering property. Galvanised bracket required to allow for overhead cable to be attached and conduit fixed to bracket See attached photo of similar bracket design Bracket will need to provide overhead height 1m higher than deck to soffit height. Looking for quote to fabricate bracket similar to photo with appropriate fixing points for cable work and if possible secure and bolt to timber soffit on-site Job is Glen Eden / Titira...

Posted 10 months ago

Tack Welds - Metal loops on Metal roof

Hobsonville, Waitakere

We have a container home and want a shade sail on the back deck. We don't want to drill into the house but need a couple of strap loops/eyes on the roof to connect it to.

Posted 10 months ago

Cast iron outdoor table and chairs as per photo

Needs to be powder coated in white. No site visit required, the items will be dropping off and picked up

Posted 10 months ago

Feature Chimney Brick Cleaning

Henderson, Waitakere

A feature internal brick chimney needing sand-blasting to bring its original colour back. Here is a link to the pic of the chimney. --- /

Posted 1 year ago

Number plate bracket

New Lynn, Waitakere

Require a number plate bracket to be made as per the attached image. Will provide an image and could do a cardboard mock as well to assist.

Posted 1 year ago

Beam Rust removal

We have some steel beams that require rust removal

Posted 1 year ago

Steel staircase adjust + install

Te Atatu Peninsula, Waitakere

We are looking to purchase a pre built industrial steel staircase. Delivery can be to our space on Rosebank road or to your premises if you have a forklift to recieve it. It requires 110mm taken out of the stair width to fit the area we have for it at our house. Then measuring and welding any structure need to recieve/install the staircase on our property. We are hoping a Hiab truck delivery to our property and a hoist over the fence will work well for install. We will be...

Posted 1 year ago

Towbar sandblast and powercoat

Hi There I have a Holden Adventra towbar in good condition. It has a small amount of surface rust on one part and I want it sandblasted and then powder coated. It is currently off the vehicle and is in three parts. 1) Bar, 2) Bracket, 3) Tongue. I'll load on photos shortly. Located in Titirangi - so West Auckland preferred.

Posted 1 year ago

Metal work

Glendene, Waitakere

I want to swoop this long pip to the short block, please recommend someone who can do this work in Auckland.

Posted 1 year ago

Deck Rail Replacement

West Harbour, Waitakere

We have had a deck upgraded but have been unable to get the original rail replaced. The original one still sits on the structure and possibly could be refitted. There are two gaps at each end that do require blocking with a new addition to the rail. The construction of the rail is of galvanised pipe.

Posted 1 year ago

Needed some Welding and maintenance work