Review

Dog door

Job image
Job image
Job image

Job description

General Handyman Tasks
Wellington

Published: 23 July 2019

I need a large size dog door to be installed in a wall, and a small cat door sized hole in the same wall to be closed off. You will need to construct a "tunnel" casing for the wall cavity. The wall is about 140mm thick. The wall cavity needs to be lined with a suitably firm liner material (wood, aluminium or 2mm thick plastic sheeting) so the dog can go through the wall "tunnel". Dog door frame is 366mm wide X 441mm high. Dog is a medium sized dog approx 7kg. The pictures show the existing hole that needs to be repaired and the dog door needs to go in the wall on the other side of the stud from the cat door hole.


Review

Workmanship
5.0
Cost
5.0
Schedule
5.0
Communications
5.0

Phil was very good to work with. He was courteous, very tidy and did a very nice job. Would recommend happily and would definitely use again.

Work carried out by the owner/operator
Reviewed on 28-08-2019

Verified Builderscrack review

Get connected now with NZ’s largest trade professional network

Get started

As seen on

logo
logo
logo
logo
logo
logo
logo
logo