Review

Hang and duct a drier 2

I bought a new drier and need to get it hung into the position of the old drier. The old drier was ducted outside and hung above the washing machine. By my calculations the existing ducting hole is offset from the outlet on the new drier. It's POSSIBLE that flexible ducting may join them up. But if it doesn't, a new hole will need to be cut and the old one sealed up and made weatherproof. The wall is a cinder block concrete wall, and the hole that would need to be cut would be around 100mm. I have all the mounting hardware that came with the drier. And some flexible ducting that may or may not be suitable... I can supply photos if that's helpful.