Recent jobs

Showing 1 to 30 of 198 jobs

Posted 5 days ago

Welding part to a plate
Site Welding Takapuna, North Shore

Just a quick weld. Have attached pictures of what we need

Posted 3 weeks ago

Solar panel frames
Other (Fabrication) Glenfield, North Shore

Need 4x frames welded. 35x70 L section 3mm aluminium. Will also need a central flat plate welded between the two long edges (perpendicular). Panels measure --- . These will be mounted to 1 inch stainless tube (horizontal) on a yacht. Also need two staunchins in 316 stainless. 1 inch tube but foot is 25mm to fit into existing base. Each staunchin needs an eye welded approx central for forward lifeline to attach. Horizontal tube will be attached to staunchin with a 90° elbow. Each elbow (2) wil...

Posted 1 month ago

Weld metal clothes line back into the pole
Site Welding Takapuna, North Shore

I need my clothes line welded back together. It’s the old fashioned 50 year old line that spins in the breeze

Posted 1 month ago

Metal ramp for driveway access
Stainless Steel Birkdale, North Shore

I would like to put some metal plates over driveway access from the road to ease access up to the driveway.

Posted 1 month ago

Modify tractor trailer hitch
Site Welding Browns Bay, North Shore

As you can see, currently we have a tow ring fitting on our Coastguard tractor, which rotates to allow normal trailers to use the tractor. We would like to change the position of the normal hitch and put two balls onto the vertical face of the "u" section under the hydraulic ram on each side and just have the central hitch for the ring type on the rear face.

Posted 2 months ago

Replace Stripped Brass Thread Insert on Camera Stand
Other (Fabrication) Northcote, North Shore

Hi there! We are a working and active photography studio who uses the Manfrotto Super Salon camera stand everyday. Through this wear and tear, we have essentially threaded the brass insert that would stabilise the mechanism that holds the height, angle etc. of the camera on the stand. Instead of shipping an expensive part from the UK, we need a technician to remove the existing, damaged/stripped brass threaded bushing from the cast iron carriage block/main housing. Then, thread a new brass ada...

Posted 2 months ago

Structural Steel- Supply and install
Structural Steelwork Campbells Bay, North Shore

Need someone to supply structural steel- Someone who can supply PS3, PS4 & Welding certificate for Council

Posted 2 months ago

Weld broken stainless steel stool
Stainless Steel Pinehill, North Shore

Have a stool where the legs need to be re-welded to the base. The original weld has ripped.

Posted 3 months ago

Welded pipe saddle bracket (x 4)
Structural Steelwork Murrays Bay, North Shore

Description: 4 x Galv Steel Bracket to secure a pipe to a retaining wall. To fit a 89.4OD steel pipe, secured with four M12 coach screws

Posted 3 months ago

Bent metal fence post
Site Welding Birkdale, North Shore

A failing pool push decking onto fence causing 1 metal fence post to bend. Needs straightening. :)

Posted 4 months ago

Intercooler crack repair (welding required)
Site Welding Mairangi Bay, North Shore

There is a crack on the intercooler that needs to be welded. Photos are attached for reference. I can bring it to your location. Looking for a quote.

Posted 4 months ago

Car sunroof metal help
Other (Fabrication) Birkenhead, North Shore

I have a small piece of metal that slides as part of my sunroof on my car thats slightly bent in a few areas.. i need assistance to straighten it so that there is no friction when opening or closing the sunroof.

Posted 4 months ago

Re-attaching metal stair handrail
Stainless Steel Torbay, North Shore

The metal bar on our stair handrail has broken from the metal handles. We want this to be re-attached. I am assuming it would re-welded.

Posted 4 months ago

Parity cover plate
Decorative Steel Glenfield, North Shore

Could you quote to make a cover for this gully trap hole.

Posted 5 months ago

Downpipe exhaust welding #2
Site Welding Forrest Hill, North Shore

Single turbo 2jz aristo, needing a downpipe from turbo exhuast to rest of exhaust, additionally an external wastegate will need to be plumbed, catalytic converter and flex sections will need to be welded as well, these will both be 3inch, same as rest of downpipe so shouldn’t be as much trouble, needs to be vbanded and made out of stainless steel, first photo is the turbo and wastegate and second photo is of a similar downpipe, i’ll supply everything except the stainless pipes.

Posted 5 months ago

Steel Angle Fabrication & Installation - 6m Electric Awning Mount (Wall-to-Wall)
Other (Fabrication) Birkdale, North Shore

I need a builder (and a welder/fabricator - can be same person or separate trades) to fabricate and install a structural steel mounting system for a 6m electric retractable awning on the eave of an outdoor hallway. A 6.2m length of 150×150×10mm steel angle gets welded up with gussets and end plates, then mounted wall-to-wall under the existing rafter tails. The existing fascia board goes back over the top so it looks the same as the rest of the house. The awning brackets bolt through the fascia...

Posted 5 months ago

Downpipe exhaust welding
Stainless Steel Forrest Hill, North Shore

Single turbo 2jz aristo, needing a downpipe from turbo exhuast to rest of exhaust, additionally an external wastegate will need to be plumbed, catalytic converter and flex sections will need to be welded as well, these will both be 3inch, same as rest of downpipe so shouldn’t be as much trouble, needs to be vbanded and made out of stainless steel, first photo is the turbo and wastegate and second photo is of a similar downpipe, everything is being done while in the car obviously. i’ll supply eve...

Posted 7 months ago

Small post tenancy power coat scratches on ranch slider
Steel Powder Coating Browns Bay, North Shore

Tenants have scratched a brand new ranch slider door frame. Colour is Dulux Matt Ghost Grey 403. Can you do a localised repair without recoating the entire frame?

Posted 8 months ago

Metal brackets for deck.
Site Welding Glenfield, North Shore

HI, I would like someone to please make made to measure two brackets for a deck beam.

Posted 8 months ago

Woodwork - Hinged Divider
Other (Fabrication) Belmont, North Shore

I'm looking for a three piece hinged divider to be fabricated out of wood. Best way to describe it is like a large fireguard that would open out and free stand but also fold flat to be stored when not being used. Dimensions would be Panel one - H120cm x W58cm Panel two - H120cm x W140cm Panel three - H120cm x W58cm not looking for anything too fancy as the unit will be painted black. Sturdy and heavy enough to free stand but light enough to be lifted by hand.

Posted 8 months ago

Parity security doors
Other (Fabrication) Glenfield, North Shore

I have some steel doors that need modifying to enable a lock to be installed.

Posted 8 months ago

Handrails internal
Handrails & Staircases Greenhithe, North Shore

Mu Mum 95 needs two sets of handrails one for the two steps from lounge to bedroom and other for three steps from lounge to bathroom preferable wall mounted if there's enough strength on wall.. Could need to be floor mounted. Potentially another very short grip or rail in hallwaynext to bathroom

Posted 9 months ago

Welding a small part of car's roof
Site Welding Castor Bay, North Shore

Hi, we are looking to fix the roof of our car. Pictures of the job attached. Tried welding it ourselves but couldn't make it. Need to put the rack and rooftop tent back on the car, so the roof needs to be solid. Thank you!

Posted 9 months ago

Underbody sand blasting van and seal
Steel Powder Coating Murrays Bay, North Shore

I want a price to sand blast under my Mazda bongo van and underbody seal as well

Posted 10 months ago

Renovation Built-in BBQ
Other (Fabrication) Birkdale, North Shore

We would like to remove the tiles of our built-in bbq and replace them with more natural stone, redo the inner shelving (and waterproof it) and adjust doors. Attaching photo of current state and photo of what we are after as inspo.

Posted 10 months ago

Bracing Installation
Structural Steelwork North Harbour, North Shore

Install bracing to purlins. Working at Heights - Must have working at heights competency, SWMS will be required.

Posted 10 months ago

Purlin Fastbrace install
Structural Steelwork Northcote, North Shore

Requires Working at Height competency. Site in North Shore. Drill and Install fastbraces

Posted 10 months ago

Rusted steel joint
Structural Steelwork Beach Haven, North Shore

St Mark coptic church We have a,rusted steel joint we looking for a steel tradesman to advise what's needs to be done and fix

Posted 10 months ago

Handrails on accessibility ramp
Handrails & Staircases Wairau Valley, North Shore

Hi There, Seeking a quote for handrails for a rear accessibility ramp in a factory building. Could be 304 stainless (to plan), or as my architect mentioned yesterday, it actually wasn’t meant to be a stainless steel specification for an inside application and galvanised steel would be ok for this staff only area if we do a minor variation to plan to accommodate. Suggest quote both material options and we’ll consider this. Consent approved plan attached.

Posted 11 months ago

Custom frame for skin
Other (Fabrication) Murrays Bay, North Shore

I have a 3.2m snake skin i want to frame to be able to hang on wall. Either a lightweight wood frame with perspex cover not glass as to heavy. Or a black perspex base with clear top.

Showing 1 to 30 of 198 jobs

Kickstart your project with a trade professional

Get started

As seen on

logo
logo
logo
logo
logo
logo
logo
logo
Get started now! Post your job for free and find a verified tradie. Post your job for free, now!
Get started

Partner with Builderscrack

Get work
Terms & Conditions | Privacy

© 2026 myQuote Limited, All Rights Reserved. "Builderscrack" and "BC" are registered trademarks of myQuote Limited. The connection process is protected by NZ patent #594581.

Partner site hipages.com.au