Active job

Internal powder coated handrails

Hi, Im after a couple bits of handrail / balustrade made up and have one that needs to be modified/re-done. All of the infill is to be done in 50 x 5 flat. Please see drawings for details. Top handrail is the one that needs to be modified currently has 50x25 top rail, we want a 50x5mm plate, which we will fit a timber top cap to afterwards. Im also after a grab rail for the stairs also done in 50x 5 flat plate. It will tie into the top handrail, come down the stairs (about 3.5m) and turn 90 degrees at the bottom (about a 1m long piece). We want the plate to be predrilled/ counter sunk from the bottom to fit a timber top cap. fixed to wall with 8-10mm round bar bent 90 degrees fixed to a 50 diameter x 3mm thick flange predrilled with 3 x 10g csk holes All of this needs to be finished to a reasonably high standard as it will be powder coated, so tidy welds / joins etc. If you have a contact or can provide powder coating please include this in your quote. We are after a Matte Black finish.