Project

Ceiling repair

Hole that needs repair

Ceiling before prep and paint

Gib piece cut out and replaced. Compound skimmed

Ceiling repaired and painting completed

Final image of ceiling completed

Project description

We were engaged to complete a ceiling repair. The affected area was cut out and a new gib board section installed. The repair was filled and skimmed with compound, then sanded once dry. A second skim coat was applied, followed by a final sand to achieve a smooth finish. The ceiling was then thoroughly cleaned and sealed with a primer. To complete the job, the entire ceiling was finished with two topcoats in flat ceiling white for a seamless result.

Last updated on 14-09-2025