Recent jobs

Showing 1 to 30 of 39 jobs

Page
<
1
2

Posted 2 months ago

Window frames need adhesive removed.

Browns Bay, North Shore

My builder has left some adhesive film on the beautiful new uPVC joinery for too long :( and the glue has baked on in the sun. Now there is adhesive stuck on teh frames and takes some work to remove it. I called Pete Wolfkamp on Sunday (Newstalk ZB) and he's suggested getting a signwriter who is good with detail work to remove it. From the manufacturer/supplier: The frames need to be cleaned with methylated spirits so the adhesive comes off. It will take some attention to detail. Then they nee...

Posted 3 months ago

Decal installed on car door

Milford, North Shore

Needing a business logo decal installed on to 2 car doors and the boot. We’ve already had the designs drawn up and have the pdf files ready to print. Just need someone who can have these stickers printed and installed on to the car. It’s a Nissan Vanette nv200 year 2010. Cheers

Posted 6 months ago

Signage installation

Albany, North Shore

ACM Panels are to be installed on the fascia, large wall above the fascia and on the return wall. Height access is required, so ideally have your own, but can be arranged if required. Job completion date before 1st October.

Posted 7 months ago

Sign removal 5/112 Bush road Rosedale

North Harbour, North Shore

Removal of signage (appprox. 3mx0.8m) at 5/112 Bush Road from exterior of ground floor office

Posted 9 months ago

Vehicle Signage

Torbay, North Shore

Need vehicle Signage on the Same Van similar signage.

Posted 10 months ago

Salon sign

Milford, North Shore

Fascia 1 @ 2800mm x 580mm + 1 @ 4000mm x 580mm satin black ACM, 6mm cut to shape 1 colour vinyl applied to face of lettering

Posted 1 year ago

Wall and Road Sign

Birkenhead, North Shore

Hi , I need a ACM Panel with digital Print + UV laminate Size : 2770 x 2100 2 Big graphics for Rooms Angle Sign Facing both sides (preferably light box) 3 x Removal of three signs from the old premises and installing on the new one. Area; Birkenhead Appointment Quote time : Tuesday 9.30am - 1.30pm Need someone who can start work as soon as possible Please text me at --- for quick response

Posted 1 year ago

Black board sign writing

Torbay, North Shore

Hi there, I am looking for someone who can do my logo and a bit of text ( about 6-7 words on a Blackboard I already have. There is signage on it already so will be good to cover it up on both sides and print in white/ off white. Size is approx 100cm x 300/400cm. Only one side needs writing and needs to be permanent as I don't want it to smudge during transportation.

Posted 2 years ago

Wooden Signs

North Harbour, North Shore

I am looking at a number of small wooden signs approx. 30cm x 10cm. They need to be signwritten vertically, in block letters and suitable to be attached to fence posts outdoors.

Posted 2 years ago

Sandwich board and one other sign

Browns Bay, North Shore

Looking for a sandwich board sign and another one of similar size to go on a brick wall, for my home based hair salon

Posted 3 years ago

Vehicle signage

Birkdale, North Shore

Need van signage done on Toyota Hiace 2013- Business Vehicle. needing a mobile service, someone who can come to us/apply signage onsite. looking forward to high quality signage and someone with attention to detail. I am a little bit choosy how i want it done. looking to get it done ASAP. Before New Year will be appreciated

Posted 3 years ago

Construction site signage

Albany, North Shore

We are looking for a small Signwriting company for the odd Construction sign, Discussion required around current specific signage requirements

Posted 3 years ago

99 Bikes Takapuna (Barrys Point Road) - paint & signage

Takapuna, North Shore

New Site: - Paint commercial building red. - Install signage (ACM panels, ACM laser cut letters & logo, 3D internally lit logo) Old Site: - Remove ACM letters and logos - Paint building in neutral colour Site visit this week Job start 1st June

Posted 4 years ago

Van sign writing

Glenfield, North Shore

Hi There, Can I please get a quotation for van signwriting? van is a Mazda bongo 2008 thank you Pradeep

Posted 4 years ago

Signwriting on van

Browns Bay, North Shore

Hi we are needing signwriting done on our van- on both sides and possibly back window. It will be our logo design. Wanting it done next week if possible.

Posted 4 years ago

Sign removal

Takapuna, North Shore

Needing to remove this sign undamaged or minimal damage if possible. And then possibly use to put up in a different location. Just the sign (vinyl) to be removed, not the frame. I think its attached by staples as per photo.

Posted 5 years ago

Sign on Hiace

Glenfield, North Shore

Hi there. Looking for signage to put on a Hiace. Thanks

Posted 5 years ago

Need 2 Ute's sign writin

Albany, North Shore

Need 2 Ute's to start with sign writin with commercial masonry ltd and phone number black dmax and single cab landcruiser Ute red

Posted 5 years ago

Need a house number done to place on my fence (12A)

Milford, North Shore

I need an aluminium plaque with the letters 12A on it in white text. Size of plaque is 250mm across and 200mm down. Backing to have adhesive please. I will place it on but just need the plaque made and sent to me

Posted 5 years ago

Greek deli signage

Browns Bay, North Shore

We are after a quote for some signage. I have attached the a preview file for what we would like for our new shop in Browns Bay together with the images from the current signage for which I guess the base can be used for the new content to be stuck on top? We would also need a small adjustment of the wording on the current ai file we have. Approximate dimensions of both sides of the building signage are: 14.35m long x 1.23m high 6.37m long x 1.23 high Any questions let us know.

Posted 5 years ago

Sign installation

Glenfield, North Shore

I’ve had 2 large “tear off signs” made to go diagonally over a large existing sign. We’ve discovered it’s not an easy task.... looking for an installer to do this for us. Thanks

Posted 5 years ago

Devonport 7 Day Pharmacy new shop signs

Devonport, North Shore

I want to refurbish the front of the shop with new signs that will attract attention. I do not have something specific in mind because the area is a little tricky to get a sign on. So would like it if someone can come take a look.

Posted 5 years ago

BK gym sign

Takapuna, North Shore

Need a sign to go on the side of the building. Approx measurements are: 5m width 3.5m height Doesn't have to be super durable and should be easy to install as may need to remove it quickly. A cloth type material (the type that they make flags from) could be the go. And then just stapled to the wall.

Posted 6 years ago

Printed clear film with measure & install on large window

Hillcrest, North Shore

Hi there - please submit a quote to me for the following : -Measure & install job, North Shore location -High resolution colour image printed onto clear film and installed onto the inside of window as attached. I will supply 3 print files for each of the window sections. -The overall size of the whole window is 2.57m length & 2.53m height. -You will have to remove the existing frosted film. -North Shore location (actual location TBC)

Posted 6 years ago

Anne

Takapuna, North Shore

Re doing ssimple sign writing on inside door,sandwich board,small light box

Posted 6 years ago

Sign

Northcote, North Shore

We need signwriting for our business cars. Could you please contact me?

Posted 6 years ago

Floor titles wrapped

Glenfield, North Shore

After the floor tiles to be wrapped into checkered board

Posted 6 years ago

Sign for developments

Campbells Bay, North Shore

Need a sign for a small development I am doing Would like to include a render of proposed houses and some worded features Cheers.

Posted 7 years ago

Vehicle Signwriting

Torbay, North Shore

I'm selling my car and want some signwriting on the rear window to advertise it: FOR SALE $7,000 ono <my phone number here> How much would the above text cost?

Posted 7 years ago

LED light box installation

Albany, North Shore

I am a design studio. I need some qualified signwriter give a quotation for 3 LED light box installation on the 3 level high building.

Showing 1 to 30 of 39 jobs

Page
<
1
2

Kickstart your project with a trade professional

As seen on

Get started now! Post your job for free and find the right tradie. Post your job for free, now!

Partner with Builderscrack

Terms & Conditions | Privacy

© 2025 myQuote Ltd, All Rights Reserved. "Builderscrack" and "BC" are registered trademarks of myQuote Limited. The connection process is protected by NZ patent #594581.

Partner site hipages.com.au