Published: 5 September 2022
Wanting to install a pre-built laundry unit into our laundry space. Will need to remove the current tub/cabinet first. New unit is 1830mm wide but can be made longer/shorter to suit. Our laundry space has a little alcove so the bench will need to be cut to fit nicely into the space. Against the back wall it measures 1620mm due to a small bit that protrudes out from the wall before reaching the 1840mm between the walls. I'm not sure if we should have this made to the 1840mm size exactly or leave it at 1830mm. There is a small wait for the unit to be made.
#1 | Tradie 1 |
|
36 jobs | No longer in contact |
#2 | Tradie 2 |
|
207 jobs | No longer in contact |
#3 | Tradie 3 |
|
8 jobs | No longer in contact |
#4 | Tradie 4 |
|
199 jobs | No longer in contact |
#5 | Tradie 5 |
|
274 jobs | No longer in contact |
#6 | Tradie 6 |
|
163 jobs | No longer in contact |
Partner with Builderscrack
Get work