Published: 10 August 2023
Have purchased a new induction hob and under bench oven. The current hob and under bench oven are 3kw's each and run off a 30amp circuit and are plugged in (not hard wired). The new hob is 7.4kw, the new stove is 3kw. The hob can go on the existing 30amp circuit and needs to be hard wired in. For the oven I need a new 15amp circuit run from the main board (distance is around 10m), install an on / off switch and hard wired in. Kitchen was a new build onto a bungalow in 2000. There is room on the main board for one more mcb.
#1 | Tradie 1 |
|
26 jobs | No longer in contact |
#2 | Tradie 2 |
|
53 jobs | No longer in contact |
#3 | Tradie 3 |
|
28 jobs | No longer in contact |
#4 | Tradie 4 |
|
61 jobs | No longer in contact |
Partner with Builderscrack
Get work