Tradies for every job.
Kaitaia to Bluff.
Sorted.

Recent North Shore Doors jobs

Check out jobs that others are using Builderscrack to get sorted.

Showing 1 to 30 of 843 jobs

Cavity slider repair & front door handle

Posted 2 days ago

The cavity slider in our bathroom door has dropped and I can't get into the rear fixing to tighten it. May need more of the frame to be removed or door removed from the slider. Our front door handle has broken. A new one needs replacing before painters arrive. Would like both jobs completed within 2 weeks.

Read more

Replace aluminium ranch slider door wheel glides and corroded window latches

Posted 4 days ago

Replace aluminium joinery ranch slider door wheels/glides Replace corroded aluminium joinery window latches There is one sliding door There are two windows each with two latches each There are another 2 windows with single latches

Read more

Entrance Door Frame

Posted 5 days ago

My entrance door frame has become out of true (over many years, but is most noticeable when outside ground conditions are dry - the door sticks - like now). It appears that the entrance area has dropped slightly (maybe 10-15mm) because of the concrete foundation and the wooden frame needs to be re-packed to lift it slightly (but not much).

Read more

Convert Laundry into drying room.

Posted 1 week ago

We have a laundry door that opens as normal. This prevents us using the space, so we want to convert it so sliding door, but it needs to slide around the corner 90deg With that done we want to get a washing line installed to hang all the washing in that laundry.

Read more

Cedar bifold door repair

Posted 1 week ago

We need a timber door guru to help us repair/service our cedar bifold door. The door has 3 panels - two are bifolding and the other is a side hinged lockable door. I believe the issue is to do with the bifold doors sagging a little but can not seem to pinpoint exactly where or how. This is causing the lockable door to be very tight on opening and closing. I do believe this will be a relatively quick job for someone who can look at it with experienced eyes and diagnose the problem.

Read more

New front door and new lock needed asap

Posted 1 week ago

Hi there, our front door has finally given up - its been on the to do list for a while. The lock is no longer working so we will need a new front door fitted with a new lock as soon as possible. Happy with a front door from Bunnings - we are on a tight budget with a baby on the way! ...... ?fbclid=... ck Thank you Amy

Read more

French door replacement

Posted 2 weeks ago

I need a French door replaced as it is damaged. It is approx 1 1/2 m wide and 2 m high, Thanks

Read more

Door frame shifted due to weather

Posted 2 weeks ago

We have owned the house for approx. 2.5 years, during this time the door frame has always been out-of-square. However during summer the frame shifts so much that the lactch doesn't work (we have come home and found the door wide open) and has now got to the point where the door can't open. We would like a perminate solution, the floor is a concrete slab. - note that the door itself is almost plumb and minimal gap at the bottom corner so there is not chance to pack the bottom hindge to adjust th...

Read more

Rental Repair

Posted 2 weeks ago

Kitchen cupboard Hinge has worked its way loose from the cabinetry. have attempted to tighten the screw however this hasn't worked. Hinge won't need to be replaced but more than likely will need re locating on the cabinet and the door. Property is our rental unit. lady living there is home most days. will need to advise her of timing to ensure access.

Read more

Installation of door handles

Posted 2 weeks ago

Replacement of door handles on 5 internal doors. We have purchased the handles but don’t have the tools to install them.

Read more

Door Fix

Posted 2 weeks ago

I’m not able to shut the door. Suddenly when i close i need to push hard then only i can close. Door is not broken...! Thanks

Read more

Fic sagging old wooden door

Posted 3 weeks ago

70s house and original door is sagging and not clicking shut. Need hinges and locks checked and repaired as needed.

Read more

New door fitting

Posted 3 weeks ago

Fitting a brand new door to house, and swapping over lock and handles

Read more

Front door won't open / shut properly

Posted 3 weeks ago

It would appear that the frame around our front door has been damaged. The door - even when locked - can now be pushed open in the wind. Once we can shut it, it seems to jam shut. We never know if we're going to be locked in / locked out or if we'll arrive home and our door will be wide open. A rough estimate would be appreciated. Thank you.

Read more

To hang a door and install catch.

Posted 3 weeks ago

To hang a door (already bought) dimensions (... ). Hinges already in place on doorframe. Also to fit a sprung ball bearing catch so that door can be pushed/pulled to open/close - no turning latch to fit. (Ball bearing catch not bought).

Read more

Hang an internal Door

Posted 3 weeks ago

The hang a simple internal door (1980 x 810 x 35) (already bought) - 3 hinges (already in place on frame) - 9 screws. To fit push/pull ball bearing latch (not bought) and two wooden handles (not yet bought).

Read more

Source and replace interior doors

Posted 4 weeks ago

To source, stain and fit 4 interior doors and dispose of old doors.

Read more

Cut hinge and latch sets and hang seven new doors supplied

Posted 4 weeks ago

As per above we have doors and latch sets and need them fitted to old frames. Paint quality

Read more

New Front Door

Posted 4 weeks ago

Looking for someone who can install a front door at my house. Please get in touch if you can do this. Cheers

Read more

Front door installation

Posted 1 month ago

I need to know what door to buy and where from ? locks, handles etc and somebody to hang it and do the work involved

Read more

Replace, Hang and Paint Front Exterior Wood door

Posted 1 month ago

Looking to have our front door replaced, with a new painted external door. We also have a locksmith lined up to do the new mortice lock and handle - so will need to synchronise the install. We also have the exterior paint onsite to be used. Solid wood door with a glass panel. Current door is 810w x 1980h, and existing lock / handle stick due to DIY installation.

Read more

Aluminium door not closing

Posted 1 month ago

Since last night I have been unable to close my aluminium door. I have tried to file some of the 'frame' down. The door has double glazing - this was installed a few years back. Afraid to use too much force to close door in case glass breaks. Will have to sleep with door slightly open again tonight.

Read more

Bi-fold door lock repairs

Posted 1 month ago

We have Bifold doors in a cafe that need lock repairs.

Read more

Internal door for a wardrobe

Posted 1 month ago

Hi I'm looking to get a door put in for a wardrobe just one door, so all i need is the wall to be cut out, door and surrounding frame as there is already a cupboard there on the side, might need shelves put in not sure ? Not in a rush so next few weeks all good. I can get the door just need the work done to fit it etc

Read more

Front door installation

Posted 1 month ago

I have a Hume ... from Bunnings and I would like it installed and door handles fitted. I think the door will need to be trimmed to fit the existing jamb.

Read more

Install front door

Posted 1 month ago

Take out old front door; measure up and install new door including fittings

Read more

Install new knobset for old interior door

Posted 1 month ago

One of the internal rooms in our house has an old door. It currently has a rim lock door handle on it. The door doesn't latch closed, because the latch has stopped working and there is nothing for the latch to connect into on the frame anyway. The door itself is narrow at around 20mm although at the door handle there is a reinforcing piece of timber that goes across the door which increases the overall thickness to 44mm. I want to install a proper passage knobset with a latch into the door...

Read more

Replacing door knobs (locks)

Posted 1 month ago

Need help with replacing the existing door locks with newer ones, six of them. The doors are all internal.

Read more

Replace ranch sliders

Posted 1 month ago

3 x ranch slider replacement around patio area with either bi-folds or eurostackers.

Read more

New door

Posted 1 month ago

Create a new door in a wall to help with the flow in the house. Photo shows the wall we want to put the door in. You’ll need to source the door. Sorry if you saw this job posted last year and nothing happened. We had a minor family issue to deal with so got distracted, but now very keen to get this job done ASAP.

Read more
Showing 1 to 30 of 843 jobs
Get started now! Post your job for free and find the right tradie. Post your job for free, now!