The roof is corrugated iron with a profile similar to Dimondek 400. Built in the 1970's. There are two patches that have rusted and were repaired with what appears to be duct tape (has a black rubber layer underneath). The tape has detriorated and water is leaking into the house. There are two areas that need repair. As the balance of the roof is fine I just wanted to place two patches over the rusted areas (something of a similar profile which is riveted and sealed over the rusted areas or bitumen sheet torched on). I also need a tidy up to one of the gutters (was not installed correctly), the end of the flashing has expanding foam need this area to be waterproofed and tidied up. Also a small section of pvc spouting which is broken off that connects to a downpipe. Would like quotes for repairs, also possibly roof replacement. Roof is 6700mm x 3400mm Two patches are 700mm x 1500mm and 1400mm x 2000mm
#1 | Tradie 1 | No recent reviews | 0 jobs | No longer in contact |
#2 | Tradie 2 | No recent reviews | 7 jobs | No longer in contact |
#3 | Tradie 3 | No recent reviews | 53 jobs | No longer in contact |
#4 | Tradie 4 | No recent reviews | 207 jobs | No longer in contact |
#5 | Tradie 5 | No recent reviews | 80 jobs | No longer in contact |
#6 | Tradie 6 | No recent reviews | 20 jobs | No longer in contact |
#7 | Tradie 7 | Not reviewed | 0 jobs | No longer in contact |
#8 | Tradie 8 | No recent reviews | 13 jobs | No longer in contact |
Partner with Builderscrack
Get work