Active job

boundary leaning wall repair

Job image

Job description

Retaining Walls & Fences
Manukau

Published: 29 July 2024

quotes for doing following job. We have attended site and found 3 x precast wall panels leaning away from its main point position. We recommend the following most cost-effective repair below: 1.Remove the corrugated sheets that is acting as a balustrade (this is one of the causes that created the wall to lean over due to wind hitting against) 2.Excavate up to 400mm deep (11m x 1m AND 11m x 300mm front and back of wall) and dispose of site. Supply and install gAp40 basecourse and 50mm of asphalt with joint seal for this section. 3.Straighten existing wall and install 100x100x5mm SHS Galvanized post to support wall.x2 4.Install galv mesh panels to existing posts on wall to create a balustrade, allowing airflow. 5.5mm Steel plates x3 to brace panel to building side


Trade professionals

#1 Tradie 1
252 jobs No longer in contact
#2 Tradie 2
108 jobs No longer in contact
#3 Tradie 3
64 jobs No longer in contact
#4 Tradie 4
36 jobs No longer in contact
#5 Tradie 5
10 jobs No longer in contact

Get connected now with NZ’s largest trade professional network

Get started

As seen on

logo
logo
logo
logo
logo
logo
logo
logo