Hang 2 x 300mm (w) x 300mm (d) x 720mm (h) kitchen cabinets, as well as 2 x 150mm (w) x 320mm (d) x 720mm (d) wine racks to internal stud wall. Cabinets and wine racks are already assembled and are to be fitted in between existing hood extractor and pantry cupboard and fridge/freezer joinery either side (see photo). Filler panels (to be provided by customer) will need to be sawn and fitted to fill the remaining gaps between the new and existing joinery/hood extractor. End panels (to be provided by the customer) are to be screwed to the exposed face of cabinets/wine racks adjacent to the extractor hood. A false top to the cupboards and wine racks is to be added to match the exiting joinery which will require filler panels (provided by customer) to be sawn to suit. The areas immediately below where the new cupboards and wine racks are to be installed is then to be tiled to match existing (tiles provided by customer). Combined total for the 2 areas either side of the splash back is approximately 0.3 m2.
Workmanship |
5.0
|
Cost |
5.0
|
Schedule |
4.0
|
Communications |
5.0
|
Good standard of workmanship at a decent price. I would definitely use Dan again.
Work carried out by the owner/operator
Reviewed on 10-09-2019
Partner with Builderscrack
Get work