As seen on
concrete chimney running up the side of house. Single storey, has about 1.5m above roof level. We started smashing and cutting the chimney from the top to get it below roof level. It has a very thick piece of angle iron type material as a re enforcing rod. The chimney thickness is approx 150mm. Probably needs to be cut, through concrete and steel re enforcing, below the eave and pulled away like that. We are doing the roof and I would rather have someone come in and do this cash job for us due to time constraints. The job is in Silverstream Upper hutt. Just off the main road. Need it done ASAP.
| #1 | Tradie 1 |
|
49 jobs | No longer in contact |
| #2 | Tradie 2 |
|
217 jobs | No longer in contact |
| #3 | Tradie 3 | No recent reviews | 0 jobs | No longer in contact |
| #4 | Tradie 4 | No recent reviews | 1 job | No longer in contact |
| #5 | Tradie 5 |
|
373 jobs | No longer in contact |
| #6 | Tradie 6 | No recent reviews | 20 jobs | No longer in contact |
| #7 | Tradie 7 | Not reviewed | 0 jobs | No longer in contact |
| #8 | Tradie 8 | No recent reviews | 17 jobs | No longer in contact |
Partner with Builderscrack
Get work