Review

Rot repair on exterior cladding

Our building has a few small spots of rot on the exterior cladding which needs to be repaired, before the cracks in the cladding are repaired, as they will reapply the paint and any stucco effect required. One is a "ledge" between a bottom cladding sheet and the concrete wall (about 45 x 20mm thick), and the other is a rotten spacer for an extractor fan outlet (which should have been ply) as they cut the hole too large. They're both small jobs, and 1 builder suggested using bog for the ledge fix, but I'm not sure if that's a good idea. The strip looks like it has been attached using coach screws, so a new piece would have to be fitted and a drip groove routed into it? Our usual builder is unavailable as he's had surgery and is recovering

Review

Workmanship	4.0
Cost	5.0
Schedule	4.0
Communications	5.0

Was glad Tyrone could fit us in before Xmas, but obviously juggling jobs and the weather took a bit longer to come than he thought. Also got his advice on a few other things, so will reuse when ready

Work carried out by the owner/operator
Reviewed on 12-01-2024

Verified Builderscrack review

Job completed by

Sorted Construction Limited

Residential Building

Wellington

4.8

Hi, I am a Licensed Building Practitioner and Qualified builder. Have been in this trade now for 19years have worked both commercial and residential. Ive just started my own business. We Specialise in minor and major renovations, building and maintenance. We are Masters in structural alteration and repairs our work is clean and tidy and always deliver quality service ....we are here to get it sorted :-).