Review
Replace 4 boards and sand surface
Job description
Need to replace 4 Kwila boards with damage before we recoat the decks ( 3 boards 2980 x 140 x 19mm and one piece 1150 x 140 x 19mm). Boards are screwed in with Torx-head screws (star-head). Screws are fine to use again. Would also like decks lightly sanded to prep for recoating. Areas are 30m2 and 25m2. Must be careful not to damage cedar cladding so edges need to be done with smaller sander. Please break quote into separate costs to do repairs and sanding. Thanks.
Review
| Workmanship |
4.0
|
| Cost |
5.0
|
| Schedule |
5.0
|
| Communications |
4.0
|
Replaced two jarrah boards on the deck. We had to ask them to countersink the screws otherwise they would have been different to the rest of the deck. Reused the old screws. Good job overall.
Work carried out by an employee of the company
Reviewed on 27-02-2024
Tradesperson reply
"Thank you for your feedback.
- Home Care"
