Posted 4 years ago
Looking for a boundary fence quote - 1200m panels, 15 meters. Quote will need to be able to be emailed to share with neighbour.
We need 2 small sections of fencing put up to keep our puppy secure in the yard. One side approx 8metres the other section approx 6 metres possibly with a gate to access the side of house (depending on cost) we have temporary fencing in place but our puppy somehow manages to still climb over the top! Would like the job done asap dependant on price. Would prefer timber but consider corrugated iron (again price dependant, quote for each would be helpful)
Posted 5 years ago
We need a boundry fence, as old one is rotton, this is a shared one with neighbours, corrogated iron, it has concrete foundation that is still solid,
I need someone to build a metal gate, plain, to match existing fence, probably not more than a metre wide to enclose a set of basement concrete steps.
About 8 metres of fencing around the house
Posted 6 years ago
Boundary fence, on a steep hill, demolished by fallen tree after last weeks rain, about 30m involved, needs replacing. There is also some fencing across a culvert which was taken out needing attention.
Its Paul here from Pure enterprises, seek your help for a quotation for the supply of labour and materials to build new dividing fence approximately 11 meters. Timaru tradies only please
Colored steel fence around small front lawn in front of unit for privacy about 10 meters
12 metres of paling fence, would like quote per metre.
Fence along front of property 2mtres high 15m length approx 2 x gates 3m and 1.1m there will be 11 or 12 posts 2.7m fence will be corrugated iron could change mind if offered alternative fencing opitions
I would like an L shaped fence built along the front (7 metres approx) and down the side of my driveway (7 metres approx), roughly 1.5-2 metres high. I would like it built with horizontal wooden slats that have roughly 10cm gaps between them. There is an existing concrete fence which would need to be demolised (or built on top of). I would like to know what my different pricing options would be.
External decorative stair railings leading to front door in public building. To be custom made from cast iron or wrought iron sensitive to the heritage of the building which is heritage listed. See attached photo as an example to open discussion.
A German shepherd dog proof fence to replace one that he could easily jump over. It is about ten metres on west side of house and a further three metre on east side. House is down a driveway shared with three other houses. I need a walk through opening/gate as this is the main access to the property. But I would also like one big enough to drive a car/trailer or at least motorbike through if possible. There also needs to be a letterbox on/in the fence. My first thoughts are it should be wooden (...
Require a 10ft x 1.1 meter high wooden farm gate to be hung at a residential property
Posted 7 years ago
We want a wooden gate (around 3.2m) at the entrance to our driveway that is just bordered with vegetation. Would involve placing a couple posts and then short section of fencing either side (around 1m max). Depending on cost we would also like discrete fencing put in a boundary with adjacent property that is currently just vegetation. Approximately 25m. Needed to secure garden for kids
Quote to remove remove existing rotten boundary timber fencing and property owner will remove the rubbish. Build new fence 2meters tall with 3 rails, with galvanized iron etc. 50meters long ish. 20 minutes out of Timaru.
Wanting a 36 m long wooden fence 2 metres tall approx, on main highway so looking for security and road noise reduction
I want a manual metal swing gate for across top of driveway to secure property for a toddler. Also looking at a smaller gate for other side of house as well.
Posted 8 years ago
I want gates to go across my driveway made of iron or similar material. Nothing elaborate just for property security.
Posted 9 years ago
Wood fencing built About 1.8M high.trellis gate x 2. Hedge and small iron gate needs to be removed and disposed of prior to fence build.
I have a 3m X 5m space that I would like to utilise as a courtyard or deck. It needs a 2m wide fence for privacy at one end. Could someone do both jobs for me?
Need a fence build on top of small brick fence. It's about 45 metres in total plus need two matching gates build. Fence to be made of 1200mm high colour steel type tin with timber framing asap
Posted 10 years ago
Installation of one curved top timber path gate for an opening of 900 wide and 1200 high.
Construct new fence along back boundary to match existing fence approx. 25m long Fence to be approx. 2.2m high with zinculume iron running horizontal Fence posts to be @ 1.8m centres Cap top of fence post with 100 x 50 mm timber board Tidy up and remove rubbish from site
Posted 11 years ago
Priority is the first job of installing a new farmgate - to my driveway I will supply gate & fittings the second job would be the building of a small woodshed depending on cost of materials and labour, the third job prep and painting of a 2 bed house, again - depending on cost.
Partner with Builderscrack