Replace a section of a boundary fence between two neighbouring sections. The old fence has already been removed. Normal timber paling fence with following dimensions: - the first 1.8m section of the fence should be 2.1m high - the remaining 7.3m section of the fence should be 1.8m high. The attached photos below show the original corrugated iron fence (since removed) bookended by a 1.8m high fence on the left and a 2.1m fence on the right. The idea would be to match these fences as much as possible aesthetically, with the height change 7.3m from the left and 1.8m from the right (as at this point the fence joins another fence perpendicular).
#1 | Tradie 1 |
|
112 jobs | No longer in contact |
#2 | Tradie 2 |
|
34 jobs | No longer in contact |
#3 | Tradie 3 |
|
0 jobs | No longer in contact |
#4 | Tradie 4 |
|
13 jobs | No longer in contact |
#5 | Tradie 5 |
|
145 jobs | No longer in contact |
Partner with Builderscrack
Get work