Posted 6 years ago
I have a Lockmaster automatic gate with a number keypad on the outside of the property. The keypad appears to have lost power (the gate works fine with the remote control). Looking for somebody to get the keypad working again. Thanks, Matt
Replace existing fence,wit corrugated iron and new post etc, 1.8 metres high currently 1.5 meters high
Current fence is 5.8 meters in length and approx 90cms high (see photo) with gate and 5 posts. I require a new 5.8 meter length timber fence + gate, all at least 1.8 meters high to replace existing one. At the far end of fence as seen in photo, a side gate 1.8 meters (approx) high between fence and side of house is also to be built. Fence to be similar in style to one pictured in second photo. Is this doable for under $1500?
38 metre fence using 18 posts (dresses) with 3 rails (RS) and 1.8 metre timber (RS)palings, includes timber capping and concrete nip. Posts and rails will be bolted with galv nuts/bolts, fencing nails for palings. Use post borer...... Happy to have supply and build price or labour only? Photos can be supplied on request.
I am looking to have two panels of Stratco ezy-slat screening put up inside the metal rail fencing on my side boundary
Wanting coloursteel fence erected around front yard 30mtrs approx. 2 gates either end depending on price.
Looking to get a colour steel fence built along the driveway boundary. approximately 13 meters long (one 90 degree corner). Approximately 1.8m high. 1 gate entrance - i would like the posts added for the gate, but not the gate itself (i will do a custom gate myself)
Approx 16m of corrugated iron fencing. 2 metre high.
Front timber picket fence - 19 meters to be built on a Napier South property as shown in photo. We would like a builder to come and build the fence - frame and standard pickets - approx 19 meters long and about 1 meter high. There is an existing concrete trim with earth from a previous garden where the fence will be built. We are okay to do the fence painting, but would like the garden and edging to be filled with concrete as part of this job.
Builder to erect a fence, approx 3m long x 2m high, 3 rails, 4 posts. Build a single step up to a deck, between the fence and house.. Materials supplied
Roll gate 6 foot high With the ability to motorise later on
i require a cyclone rolled bottom fence to replace a picket fence along the frontage of the section and one panel up the drive approx 50 feet in length round metal posts
Need a pool gate on one side of the house and a single coloursteel gate on the other side.new build house.Need gates asap
Want to install a motorised driveway sliding gate - 3m x 1.2m. It’s a new gate so the track and electrical work must be done. I could supply the gate or get one from you. Fred
15 meter long boundary fence.
Large area to be fenced and gated ( 3 gates) for chickens. Thinking really good quality treated uprights concreted in with cyclone netting attached.
A front and partial side timber fence with diagonal trellis top - total height approx 1.50m. I have an existing very outdated punga fence that will need removing first.
I have approx 8m of corrugated iron fence that needs the two timber rails replaced as they're rotten, then the iron reattached
Quote for a back of section fence in colour steel. Needing someone to install it also. No perkies, you have to legitimately pay tax.
I need a high fence with a gate installing all around the front of my property..
We have a boundary fence that needs replacing - approximately 32 metres. Ideally want to replace with colorbond or colour steel type fencing, whatever is most cost effective.
wanting a very basic gate across the driveway to seperate front and back yard to keep our dog in. Needs to be at least 5ft in height and about 2.66m across. I am wanting something as cost efficient as possible and before Christmas.
Remove old block fence and build new pannel fence
Need two gates - one 0.7m wide and one 2.8m (both as side gates to keep dogs at back of property).
Colour steel fence erected around the road frontage of the section.
Replace a wire fence down my driveway which is approximately 20 meters long with a grape vine trellis fence approximately 5 meters high to support six grape plants and also a wooden trellis fenced with a concrete nib approximately 6 meters long x 5 meters high to support two passionfruit plants. Four-Cane and Umbrella Kniffin Systems for the grapes would be ideal.
Install 20metres colour steel fencing with gate and concrete nib. Old fence has been removed
Entrance way fence and gate.posibly colour steel. Only about three meters
Partner with Builderscrack