Install timber paling fence (between a granny flat and main house) to a total of 25m in area, approx 10m in one direction then 90degree angle for the balance of approx 15m. Fence to be constructed using 100 x 100 rough sawn posts, 3 rails using 100 x 50 rough sawn timber. Palings to be 150 x 25 and 1800mm high. First layer of palings to be spaced 75mm apart, second layer of palings to be centred over the 75mm gap to give a staggered appearance and also eliminating the join to aid in noise reduction and privacy. Construct a pedestrian gate with a simple steel hinge and latch in part of fence. Fence to have a 300mm wide concrete mow strip underneath the fence. Materials including palings, posts, rails, nails, boxing, concrete, brackets and gate with hinge and latch + labour etc
Workmanship |
5.0
|
Cost |
4.0
|
Schedule |
5.0
|
Communications |
4.0
|
Although this wasn't the cheapest quote I received I chose to go with these guys and I am very pleased with the results. Hayden from Camlitt Fencing was very professional and easy to deal with, kept to budget and schedule, would recommend them again :-) Also Hayden kindly put up the clothesline free of charge as well which is much appreciated :)
Work carried out by the owner/operator
Reviewed on 13-03-2017
Tradesperson reply
"Thank you for your feedback, pleased you were impressed with our work, we pride ourselves on quality workmanship and efficiency.
Many thanks
Hayden and Janelle Hazlitt"
Partner with Builderscrack
Get work