Installation of Tesla Gen 3 Wall Connector inside garage. Cable run back to the switchboard is approximately 10m. Cable to be run in conduit up to the ceiling, and then through the loft space above the garage (good access above whole work area, including above consumer unit). Picture of consumer unit included, as well as house main fuse (63amp). Also require installation of 2 x 4 gang sockets (or 4 x 2 gang sockets) in two locations in the garage. Sockets to be surface mounted with conduit up to the ceiling. Sockets either to be wired into existing circuit or back to the switchboard, at electrician's discretion. 10amp sockets will suffice - to be used for garage fridge, charging power tool batteries and occasional domestic power tool operation.
#1 | Tradie 1 |
|
10 jobs | Requesting contact |
#2 | Tradie 2 | No recent reviews | 12 jobs | Requesting contact |
#3 | Tradie 3 | Not reviewed | 1 job | Requesting contact |
#4 | Tradie 4 |
|
6 jobs | No longer in contact |
#5 | Tradie 5 |
|
45 jobs | No longer in contact |
#6 | Tradie 6 |
|
1 job | No longer in contact |
#7 | Tradie 7 |
|
8 jobs | No longer in contact |
#8 | Tradie 8 |
|
4 jobs | No longer in contact |
Partner with Builderscrack
Get work