Active job

Car Port

We are looking for a quality licensed Builder to design and construct a new free-standing, open-sided carport on our property with long run factory-coated corrugate metal roof. All to be built to the NZ building code specs and using stainless steel fixings as we are close to the coast. We need this job quoted for ASAP and fully constructed (job completed) by Sunday 01 November 2020. You will be required to construct the car port and supply and install all materials. Please see the attached pictures of the area where the car port is to be built (at the back of this area flush up against the fence etc. Construction will include the entire project including digging 900 mm deep x 400 mm holes at each corner peg, laying the posts, beams and rafters and finishing it off with factory-coated corrugate metal roof. Holes for the posts will be dug into an existing layer of base course metal and dirt. There are also existing fence posts that can be used as support posts for some of the walls on the right hand and back side of the car port. (Please see attached pics) Measurements: Length & Width 5.7 Meters long x 4.9 Meters Wide Height: Sloped roof on an angle (right to left) Right side wall height 1.8 Meters high - Left side Wall height 4.2 Meters high Please only contact us if you can get this job built and completed by 1 November 2020. Many thanks