Review

ESSENTIAL: Filling silicone to replace missing scribers

Job image
Job image
Job image
Job image

Job description

General Building
Hutt Valley

There is a leak from the recent storm; with prime suspected cause being the missing scribers between weatherboard/facing board. This job is to: - Fill in 15 gaps as shown in photo between weatherboard and the facing board using Sikaflex MS Black o The 15 gaps starts from the top on the right hand side o Sikaflex MS Black can be provided by me, if you wish - The height of the top gap (near apex of the roof) is approximately 4m off the ground You would be expected to: - Bring your own equipment, including ladder o But Sikaflex MS Black can be provided by me if necessary - Mask off each gap with masking tape prior to applying silicone, as shown in photo - Trowel off silicone properly to completely fill gap, as shown in photo - Take a photo for each completed silicone plug (and send by sms/whatsapp/email whichever is easier), as inspection evidence. - Keep social distancing, which should be easy as this is an outside job. Thank you.


Get connected now with NZ’s largest trade professional network

Get started

As seen on

logo
logo
logo
logo
logo
logo
logo
logo