Install kitchen rangehood. Replacing existing tilt rangehood with chimney rangehood. Exhaust needs to be re-routed (probably through ceiling) as current in 100mm and fed into wall to the left side of tilt hood with the external wall further to the left. Immediately to right is of the current exhaust is a wooden stud. So if the exhaust was fed out the same hole it would be exposed and it cannot be moved to the right (away from the window and closer to the chimney because of the stud,) If fed through the ceiling the beams do run in the direction towards to external wall, although there is a room immediately above the location
Workmanship |
4.0
|
Cost |
4.0
|
Schedule |
5.0
|
Communications |
5.0
|
Work carried out by the owner/operator
Reviewed on 25-11-2019
Partner with Builderscrack
Get work