Active job

Smallish bathroom, big renovation

High level summary... Smallish bathroom. Currently 6.5m2, but will be extending to 7m2. (Existing cylinder is currently between bathroom and adjoining bedroom. Remove the wall that separates the cylinder from the bathroom permanently (and the cylinder) - this area is to become part of an alcove shower.) Install new Heat Pump Hot Water integrated cylinder externally outside the bathroom. Replace bath, basin & vanity, and shower fittings in new locations. Install toilet, bath filler, recessed mirror cabinet, fan heater, heated towel rail. Fully tiled floor and some walls. Some part tiled to 1800, 2 walls around vanity to about 1200. 2 recessed tiled shelves. Walls and floors waterproofed. Under tile heating in parts of the floor. Towel rails, toilet roll and brush holders to be installed. Additional pieces of work for individual value estimate... A separate estimate value to internally refurbishing the existing built in floor to ceiling cupboards and new doors. Including installing a frame on runners at the bottom to hang a laundry basket from. A separate estimate value (and outlined solutions) to sound proofing the wall between the alcove shower and the adjoining bedroom. Possibly also sound proofing the other internal wall of the alcove and the wall behind the vanity. I’m thinking of replacing the hot water piping to the kitchen, laundry and separate toilet to a narrower bore and am interested in your views on this, and a quote for this (approx. 12m of pipe). The hot water pipes to be lagged for their entire length for all taps whether they are replaced or not. More detail readily available.