Upgrading our kitchen's monospaced tap/mixer, but the existing hole is 43.6mm when it needs to be minimum 48mm diameter hole. Plus, I believe the existing cold water flexible hose to about 10mm too short. I've purchased the new mixer tap. This should be a simple job. Job Requirement: * Increase existing hole in a stainless steel sink to the required measurements for the new tap. * Install new mixer tap. * Replace/extend the existing flexible hose if required.
Workmanship |
5.0
|
Cost |
5.0
|
Schedule |
5.0
|
Communications |
5.0
|
Great guy, Job well done.
Work carried out by the owner/operator
Reviewed on 21-08-2018
#1 | Tradie 1 | No recent reviews | 8 jobs | Secured job |
Partner with Builderscrack
Get work