COVID-19: Alert Level 2 allows all trade related business with proper safety protocols. More information here.

Tradies for every job.
Kaitaia to Bluff.
Sorted.

Recent Rodney Flooring jobs

Check out jobs that others are using Builderscrack to get sorted.

Showing 1 to 30 of 218 jobs

Strand floor sanding

Posted 5 days ago

We are needing a floor sander to knock out bumps and edges from strand floor in one of our builds in Waimauku.

Read more

Shed Floor Coating

Posted 6 days ago

We have just erected a 12m x 16m shed and want to paint the floor with an epoxy resin, all water tight and fully cured concrete, ready to go!

Read more

Installation of 18sqm recycled oregon pine

Posted 1 week ago

Installation of roughly 18 sqm recycled oregon pine on concrete floor. This will involve grinding and levelling of some of the concrete floor. Also on roughly 9sqm there is cork glued to the concrete which needs to be removed first.

Read more

Bamboo Flooring Installation

Posted 1 week ago

Approx 125sqm bamboo flooring to be installed. Product is Teragren Synergy Wide Plank. Timeframe is about 8 weeks due to import lead time from USA.

Read more

Small bathroom floor install on clean concrete platform - GULF HARBOUR

Posted 2 weeks ago

Prepped concrete floor surface. Owner will install skirting around walls and vanity so easy in and out. Looking for local installer due to small nature of job 2.2 by 1.8 metre ensuite. Thank you!

Read more

Installation of 8m2 of timber floor #2

Posted 3 weeks ago

Installation of roughly 8m2 recycled oregon pine T&G flooring on concrete surface including a small step/ramp (same timber) down to the original douglas fir which is level with the current concrete surface and will therefore sit below the newly installed floor. T&G Oregon pine timber will be provided.

Read more

Vinyl installation

Posted 3 weeks ago

Looking to get vinyl installed in our new house in Gulf Habour. We have Vinyl already purchased and can get more if need be. Looking to get it done as soon as possible.

Read more

Sheet vinyl flooring #2

Posted 3 weeks ago

I need someone to install our sheet vinyl flooring in our house. We have already purchased the roll of vinyl so we only require an installer. As soon as possible, this week if possible. We have about 50sqm or less of vinyl flooring to lay including stairs. Not sure if we need underlay or anything hoping someone could help us out with that too.

Read more

Sheet vinyl flooring

Posted 3 weeks ago

I need someone to install our sheet vinyl flooring in our house. As soon as possible, this week if possible. We have about 50sqm or less of vinyl flooring to lay including stairs. Not sure if we need underlay or anything hoping someone could help us out with that too.

Read more

Fix broken kauri floorboards in villa

Posted 1 month ago

Kauri floor boards in high traffic area have some broken tongue and groove and are lose. House recently moved and re piled. There are only a few floor boards affected in an area approximately 10m x 10m.

Read more

Floor Sanding & Polishing

Posted 1 month ago

Kia ora! We’re looking for a tradie to sand and polish the wooden floor of our home that we’re renovating. Ideally to be done ASAP.

Read more

Installation of Vinyl flooring

Posted 2 months ago

I need a professional to complete installation of vinyl flooring for 1 bathroom and 1Toilet. This job is ready for installation.

Read more

DeLacey

Posted 2 months ago

Simple job —square sun porch—5m-4m underlay required—two angle cuts—3m wide vynal

Read more

Sand wooden floors in two four bedroom houses - Snells Beach near Warkworth

Posted 2 months ago

I’m currently renovating two four bedroom houses at the same time. The floors will be ready for sanding in 2-3 weeks so I’m looking for someone in the Warkworth area who can do the work. Thank you!

Read more

Sand and polyurethane a floor

Posted 3 months ago

small area of lounge and kitchen to be sanded and coated with polyurethane

Read more

Want it done

Posted 3 months ago

Floor refurnishing sanding and revarnishing Kitchen n dining approx 11 by 7 mtrs

Read more

Needitdone

Posted 3 months ago

Refurnish wooden floors in dining and kitchen area approx 7x 11 meters

Read more

Installation of 8m2 of timber floor

Posted 3 months ago

Installation of roughly 8m2 recycled oregon pine T&G flooring on concrete surface including a small step/ramp (same timber) down to the original douglas fir which is level with the current concrete surface and will therefore sit below the newly installed floor. T&G Oregon pine timber will be provided.

Read more

Quote to lay laminate flooring

Posted 3 months ago

As above - about 70 square meters

Read more

Wooden flooring and stairs

Posted 3 months ago

We would like a price for wooden flooring in upstairs lounge area and the same flooring used on our stairs

Read more

Staining of Deck

Posted 3 months ago

We would like to have our deck stained. Hard wood- approx 3 years old so will need a clean prior. Still in good condition. Approx 50 sq m - including some stairs and planters on sides.

Read more

Kewai st

Posted 4 months ago

fine sand oak veneer flooring on a 15 mm overlay DFD euro flooring needs new whitewash oak stain plus two coats high traffic matt polyurethane about 80 m2 lounge-kitchen and hallway. original floor installed 2014 in omaha. ideally febuary

Read more

Floor board replacement

Posted 4 months ago

Floorboard needs to be replaced as there is a whole in the old one from water damage

Read more

SMITH RENO #3

Posted 4 months ago

I have a mixture of flooring, carpet, vinyl and partical board. I need advise on how best to tackle and what would be the best product. It is a Kitchen, Dining and Small Living area. I am leaning toward Laminated flooring to try and get a similar look to the wooden flooring in existance in the rest of the house if possible.

Read more

Floor sanding and varnish - pine floor - 60 sqm

Posted 4 months ago

Refurbished bungalow requires floor to be sanded and varnished. 3 bedroom house - - approx 50-60 sqm. The three bedrooms are carpeted so only living area, kitchen and hallway need sanding and varnish. See photos for plan and current flooring state

Read more

Repair of small tear in vinyl

Posted 4 months ago

Small tear in vinyl. Has been glued down but needs to be repaired properly so it doesn't catch. See photos attached for size. Would ideally need the whole square of vinyl to be replaced so it has seamless lines. The vinyl name is Select Titanium - Manon 692, and if you can supply the replacement square it would be ideal. But if not we will try and source it ourselves. Thanks.

Read more

Quick flooring solution

Posted 4 months ago

Hi there, can you help me? I need some flooring for my sleepout within the next couple of weeks. I have some recycled vinyl planks but it might just be a little bit less than needed (pic attached). Alternatively need something else similar to use (can you supply?) surface is concrete, it’s flat but not level, I don’t think it needs any leveling cause it’s just a sleepout. Please get in touch. Cheers

Read more

Vinyl laying

Posted 5 months ago

My son-in-law is providing the vinyl for my kitchen and preparing the floor but I need somebody to put it down. This won't be needed to be done until the New Year.

Read more

Hallway floor repair

Posted 6 months ago

The hallway floor has had water damage and fallen in . This needs to replaced. I'm the initial contact for the job Location Taupaki Greg McCracken ...

Read more

Lay new & patch existing solid Timber flooring #2

Posted 6 months ago

Laying 15 sq meter new solid wood t&g flooring alongside existing flooring & patch a few small areas. We have the flooring just need floor prepped, flooring laid & sanded (possibly finished too).

Read more
Showing 1 to 30 of 218 jobs
Get started now! Post your job for free and find the right tradie. Post your job for free, now!