Active job

92m of fencing plus access gate

Hi there, I am after a quote to reinstate my front boundary fence and install a farm gate. The distance is approximately 96 m from my neighbors fence (small sheep paddock) nr the power pole to the drain running parallel to the rural road. The gate is to be located at the existing road access. Fence to be 1m high with post and wire or sheep mesh (mesh is preferred if a similar price). There are some existing posts that can be followed (don’t re-use them unless they are solid) for the alignment. You will need to spray or cut the grass back first. Gate to be 1 x 3.6m (or similar) galv. bar gate. Top gudgeon pin to be through the post with a washer and nut. Bottom can be a threaded if needed. Just tie off with some wire to the other post when done and I will add a chain and lock later. Paddock has just been mown and is dry enough at the moment to drive on it, but the grass where the fence is going is still rank and hasn't been mown (due to the posts and old wire possibly on the ground in there).