Active job

Hedge Removal and Replace with Timber Post / Metal Panel Fence

Hi there. Currently we have a 21m hedge along our front boundary, and a small 1.6m section of short timber fence on the other side of the driveway (photos attached). We want to have the hedge removed and replaced with a 6ft fence constructed using 150 x 150mm Timber posts, and metal framed coloursteel panels. An example picture is attached. We would prefer the steel profile to match the garage behind (T Rib) but the Boundaryline profile is ok. The new fence will need to also have short tapered (2m approx) sections along the side boundaries to go from 6ft to existing fences heights (4ft approx), and on each side of the driveway entry. The driveway entry needs to be sufficiently wide to accomodate the addition of gates at a later stage and allowing enough width for delivery trucks etc to easily enter. Power and phone services run along the north boundary, see picture. Water goes up the driveway. So we are looking for quotes to: 1) Remove the existing hedge and dispose (mulching for use around property is ok) 2) Supply materials (although we can order some materials from our trade suppliers if more cost effective) 3) Construct a replacement fence as described and per diagram / example photo attached - Coloursteel to be Grey Friars colour 4) Fit Vertical style , through fence letterbox, adjacent to driveway. Cheers.