35m of paths around the house + area to park bins (100mm thick, 1.0m wide), 9.15m of footpath, (150mm thick, 1.36m wide), and remove and replace a section of the driveway 4.8m x 6.0m between the footpath and the boundary. This was 100mm thick, reinforced, but council requires 150mm thick, not reinforced. Paths must slope away from the house with a 1:60 fall, and be at least 150mm from the top of the path to the bottom weather board. Concrete colored with 10kg of black oxide. My calculations: House path plus bin area: 4.192cu Footpath (kerb crossing): 1.86cu Driveway section ( --- cu Total concrete: 10.37cu meters Work required: Dig and prepare paths around the house (mixture of dirt and gap60) Remove existing footpath, remove section of driveway. Pour concrete and finish to match existing driveway (10kg black oxide, brush finish)
#1 | Tradie 1 |
|
58 jobs | No longer in contact |
#2 | Tradie 2 |
|
154 jobs | No longer in contact |
#3 | Tradie 3 |
|
85 jobs | No longer in contact |
#4 | Tradie 4 |
|
66 jobs | No longer in contact |
#5 | Tradie 5 |
|
67 jobs | No longer in contact |
#6 | Tradie 6 |
|
26 jobs | No longer in contact |
#7 | Tradie 7 |
|
12 jobs | No longer in contact |
Partner with Builderscrack
Get work