Closed job

Driveway / Retaining Wall / Earthworks

DRIVEWAY /RETAINING WALL / EARTHWORKS WE ARE LOOKING FOR ONE COMPANY TO QUOTE FOR AND COMPLETE THE ENTIRE BELOW JOB WITHIN THE NEXT MONTH OR TWO. WE HAVE A TOTAL BUDGET OF BETWEEN $20'000 TO $29'000 MAX (INCLUDING GST) FOR THIS COMPLETE JOB SO PLEASE ONLY CONTACT US TO COME TO QUOTE FOR THIS JOB IF YOU CAN FIT WITHIN THIS TOTAL BUDGET FOR THE COMPLETE JOB. CHEERS JOB DESCRIPTION: *SUPPLY A 1 METER ABOVE GROUND LEVEL RETAINING WALL WITH A 1 METER PRIVACY BATON FENCE PALINGS ON TOP OF RETAINING WALL - TOTAL HEIGHT 2 METERS ABOVE EXISTING GROUND LEVEL SHARING THE SAME POST. * NEW DRIVEWAY AREA APPROX 95m2. EXCAVATE AND REMOVE UNWANTED SPOIL. SUPPLY, PLACE AND COMPACT BASE COURSE AS REQUIRED TO FORM NEW LEVELS (FROM 0MM TO AROUND 500MM DEEP) *SUPPLY, LAY AND FINISH 100MM THICK 20MPA FIBRE MESH REINFORCED CONCRETE SLAB WITH A BLACK TINT TO FORM NEW DRIVEWAY EXTENSION. RETAINING WALL AND FENCE DESIGN NOTES: POINT C TO POINT D (ON DIAGRAM) 18.5 METERS LONG 1 METER ABOVE GROUND LEVEL RETAINING WALL WITH A 1 METER PRIVACY BATON FENCE PALINGS ON TOP OF RETAINING WALL - TOTAL HEIGHT 2 METERS ABOVE EXISTING GROUND LEVEL SHARING THE SAME POST THE RETAINING WALL WILL HOLD BASE COURSE GRAVEL FILL OF BETWEEN 0MM TO 500 MM DEEP ALONG THIS SECTION OF THE WALL. THE BOTTOM 1 METER HIGH RETAINING WALL FENCE WILL BE CONSTRUCTED OF H5 125 X125MM POSTS SPACED AT 1 METER APART AND H4 200 X 50MM RETAINING BOARDS PLACED HORIZONTALLY. THE POSTS WILL BE CONCRETED INTO 1 TO 2 METER DEEP HOLES DUG WITH AN EXCAVATOR WITH 20 MPA CONCRETE. THE POSTS WILL BE SPACED 1 METER APART. THE TOP 1 METER SECTION OF THE FENCE WILL BE CONSTRUCTED OF H3.2 FENCE PALINGS 150 X 25 mm - 1 METER HIGH AND 100 x 50MM x H3.2 FENCE RAIL. ALL FIXINGS WILL BE STAINLESS STEEL INCLUDING STAINLESS STEEL 100 MM 14G PURLIN / BATTEN SCREWS ETC TO ATTACH THE RETAINING BOARDS AND FENCE RAIL ETC. POINT B TO POINT C (ON DIAGRAM) 4.6 METERS LONG 2 METERS HIGH - SQUARE TO THE FACE OF THE HOUSE 1 METER ABOVE GROUND LEVEL RETAINING WALL WITH A 1 METER PRIVACY BATON FENCE PALINGS ON TOP OF RETAINING WALL - TOTAL HEIGHT 2 METERS ABOVE EXISTING GROUND LEVEL SHARING THE SAME POST THE RETAINING WALL WILL HOLD A BASE COURSE GRAVEL FILL OF AROUND 500 MM DEEP ALONG THIS SECTION OF THE FENCE. THE BOTTOM 1 METER HIGH RETAINING WALL FENCE WILL BE CONSTRUCTED OF H5 125 X125MM POSTS SPACED AT 1 METER APART AND H4 200 X 50MM RETAINING BOARDS PLACED HORIZONTALLY. THE POSTS WILL BE CONCRETED INTO 1 to 2 METER DEEP HOLES DUG WITH AN EXCAVATOR WITH 20 MPA CONCRETE. THE POSTS WILL BE SPACED 1 METER APART. THE TOP 1 METER SECTION OF THE FENCE WILL BE CONSTRUCTED OF H3.2 FENCE PALINGS 150 X 25 mm - 1 METER HIGH AND 100 x 50MM x H3.2 FENCE RAIL ALL FIXINGS WILL BE STAINLESS STEEL INCLUDING STAINLESS STEEL 100 MM 14G PURLIN / BATTEN SCREWS ETC TO ATTACH THE RETAINING BOARDS AND FENCE RAIL ETC POINT A TO POINT B (ON DIAGRAM) BLEND IN WITH PATH OR CONSTRUCT A SMALL RETAINING WALL THIS SECTION IS WHERE THE CONCRETE PATH TO THE FRONT DOOR MEETS THE NEW CONCRETE PAD SO WILL EITHER BE BLENDED INTO THE NEW DRIVEWAY OR A SMALL RETAINING WALL WILL BE BUILT TO RETAIN THE BASE COURSE AND CONCRETE 5.4 METERS LONG - UP TO 1 METER HIGH 1 METER ABOVE GROUND LEVEL RETAINING WALL - TOTAL HEIGHT UP TO 1.0 METERS ABOVE EXISTING GROUND LEVEL THE 1 METER HIGH RETAINING WALL FENCE WILL BE CONSTRUCTED OF H5 125 X125MM POSTS AND H4 200 X 50MM RETAINING BOARDS PLACED HORIZONTALLY. THERE IS NO NEED FOR THE ADDITIONAL 1 METER OF PRIVACY PALINGS ALONG THIS SECTION OF THE FENCE. THE POSTS WILL BE CONCRETED IN UP TO 1 METER DEEP HOLES DUG WITH AN EXCAVATOR WITH 20 MPA CONCRETE. THE POSTS WILL BE SPACED 1 METER APART. ALL FIXINGS WILL BE STAINLESS STEEL INCLUDING 100 MM 14G PURLIN / BATTEN SCREWS ETC TO ATTACH THE RETAINING BOARDS ETC.

Job completed by

rlLandscaping

Concrete Services

Hutt Valley

5.0

Hi,i have been Landscaping in the greater Wellington area for 10yrs.We specialise in Solid Landscaping eg, concrete driveways,fencing ,retaining walls, decks ,excavations, etc.