As seen on
Published: 28 November 2024
Currently having hoists fitted in a building I am turning into a workshop, but one of the hoist beams is on concrete too shallow. The other side is fine. I need a 1200 x 1200mm concrete square cut and then filled with rebar and concrete with a 32MPA hardness or greater at approx 175-200mm deep.
| #1 | Tradie 1 |
|
3 jobs | Requesting contact |
| #2 | Tradie 2 |
|
44 jobs | Requesting contact |
| #3 | Tradie 3 |
|
30 jobs | Requesting contact |
| #4 | Tradie 4 |
|
66 jobs | No longer in contact |
Partner with Builderscrack
Get work