The current deadbolt lock leaves a square slot in the door that is too large for the new smart lock. Need a small square of wood cut to shape and glue into the slot then new holes re-drilled in the same place for the new lock. Photo 1 attached is of the door and current lock. Photo 2 is the internal of the current lock, showing the rough size of the slot in the door that needs to be filled. Photo 3 is the measurement of the new holes required for the new smart lock. There is no need to paint the door as the case of the new lock is quite large and should cover the mark left by the existing lock. Smart lock installation instructions: ---
Workmanship |
4.0
|
Cost |
5.0
|
Schedule |
5.0
|
Communications |
5.0
|
Work carried out by the owner/operator
Reviewed on 23-03-2021
Partner with Builderscrack
Get work