Closed job

Swimming pool decking restoration

Job description

Decking Restoration & Repair
Waikato

This work was described by my swimming pool installer as follows: You asked for me to give you an outline of what i think needs to be done around the pool edge after the deck was removed in spots. Here goes….. The aluminum face plate that we unscrewed is in 3 pieces. it can't be screwed back on until the bearers are renewed and the top boards put on. This will hang down about 50mm and finish the pool off nicely. I was lucky enough not to take off every top board, the south end of the pool was a few mm away from the clip so i could leave that decking alone. Id say from looking at the work required, about 15 to 20 mtrs of 200mm x 50mm timber is needed, a drop saw, hammer and about 100 nails and about 20 mtrs of top boards. some are still usable, especially the long lengths on each side. Some one who can hit nails in and has a small background on timber work could easily put the deck back together in about 5 hours once everything is onsite and ready.


Get connected now with NZ’s largest trade professional network

Get started

As seen on

logo
logo
logo
logo
logo
logo
logo
logo