Garage Door Parts connect the sections of the door together and provide the travel mechanism and counterbalance to allow the sections to move above the door opening. The parts that join the sections together and allow them to pivot are called hinges.
The end hinges serve the dual purpose of carrying the door rollers as they travel through the vertical tracks and overhead in the horizontal garage door tracks. Wider doors are supported with struts to prevent the sections from sagging or buckling.
The tops and bottoms of garage doors have fixtures to carry the rollers. These parts are called top fixtures and bottom fixtures. These and all the other parts are connected with fasteners. The counterbalance system comprises the door parts that lift the door above the opening. The lift is accomplished with cables attached to the bottom fixtures of the door at one end and to the cable drums at each end of the shaft above the door.
The parts providing the counterbalance torque consist of the torsion springs, cones, end bearing plates, centre, shafts and couplers. One end of each spring is secured to a bracket fastened to the jamb. The other end of the torsion spring is wound and secured to the shaft with the setscrews of the winding cone. The torque is transferred through the shaft to the cable drums and on to the cables on each side of the door.
Extension spring parts provide a balanced system with the pull of the springs against the weight of the door.
Additional door parts include the weather-stripping to insulate the perimeter of the door, with astragal secured to the bottom and stop moulding on the sides and top of the opening. Windows provide light and visibility. Garage door exhaust ports allow car engines to run in the garage while routing fumes through the exhaust hoses.
Door locks and handles allow for manual operation, while openers controlled by remote transmitters and keypads are the preferred choice of operation.
A garden shed is used for storing garden tools, fertilizer, lawn mowers and other items used to care for lawns and gardens. They’re ideal for keeping these items within reach but protected from the weather.
Rain and sun will damage garden tools making them brittle or creating rust.
A professional garden shed installation will ensure both your tools and your shed will remain in use for many years to come.
Garden sheds are usually located in the back of the yard, often out of sight from the street. Items not stored in the garage or house are often placed in the garden shed. It’s prudent to lock garden sheds to stop theft or small children getting into potentially harmful items.
If you’ve bought your new shed, and hired a tradesperson to complete your garden shed installation, and decided where to place it, you then need to consider what to do when preparing your garden.
When installing a shed, ensure that you have a level surface to build on. The flooring can be made from timber decking, concrete or garden slabs. If you don’t have a level surface your shed could warp which can damage the timber or windows.
If you’re using a shed base that’s provided as part of the garden shed installation, you’ll still need to clear the site from rubble and ensure its level. Lay a weed proof membrane to prevent growth and damage to your shed.